AQW612S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AQW612S belongs to an advanced type of solid state relays (SSRs) – specific types of switches that are designed to be capable of turning on or off various devices. The relay works by using the power from a controlling circuit to actuate a semiconductor output switch. The advantages of using SSRs in place of traditional electromechanical relays include their simplicity, small physical size, silent operation, and long lifespan.

The AQW6111S is typically used as a non contact controller in production line automation systems. It can be triggered ON or OFF by providing it with a low power input signal – usually via a logic pulse of less than 5V. With this type of relay, it’s possible to achieve switching frequencies of up to 0.2Hz with uniform on or off switching times under deterministic conditions.

The AQW612S works on the principle of zero-crossing detection. It monitors the input voltage by interpreting it as an AC waveform and constantly looks for when the input voltage passes through a reference level of either 0 or -V. The actual reference level is defined by a zero-cross circuitry. Once the voltage hits the reference level, the AQW612S checks to see if the voltage is rising or falling. It also checks the input command and then activates or deactivates the output accordingly.

The AQW612S is ideally designed to be used as a high voltage, high current switch for light loads. It is capable of switching loads up to 250V and 15A. This type of SSR has two modes of operation: the pulse-width control mode and the hysteresis control mode.

In pulse-width control mode, the AQW612S is utilized to control a load by adjusting the pulse width of the input voltage. This means that the on-off switching speed of the load is determined by the length of the pulse. A longer pulse will switch the load on for a longer period of time.

The hysteresis control mode allows for higher switching speeds. The AQW612S monitors the input voltage via a curvilinear voltage ramp. It then switches the output on or off depending on the current level of the input voltage. This allows for very fast activation and deactivation of the load.

The AQW612S is an efficient and reliable way to power and switch numerous devices. Due to its small size and low power requirements, it has become a popular choice for use in commercial and residential applications.

The specific data is subject to PDF, and the above content is for reference