ASCSM-19.440MHZ-LY-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are made up of several components that interact to create a continuous, periodic signal or waveform. The purpose of these components is to generate a signal with a specific frequency and often also an amplitude, or voltage. If the oscillator is designed correctly, it can be tuned or adjusted to generate the desired signal at any chosen frequency. One such device is the ASCSM-19.440MHZ-LY-T.

The ASCSM-19.440MHZ-LY-T is a generic frequency oscillator specifically designed for applications in the microwave and millimeter wave frequencies. It is an active device, meaning it consists of several components that work together to create the desired signal—a continuous, periodic signal or waveform. These components include a frequency-stable oscillator, amplifier, in-line attenuator, and a control circuit. It is designed to work in a frequency range of 8GHz to 20GHz.

The frequency-stable oscillator is the core of the oscillator and is used to create the desired signal at the chosen frequency. It is essentially a voltage-controlled oscillator (VCO) which operates by converting an input voltage signal into an output signal at the desired frequency. The oscillator’s frequency is determined by the parameters of the circuit and the applied voltage. This oscillator is generally designed to be extremely sensitive to variations in the applied voltage, allowing it to be tuned to generate the desired frequency.

The amplifier is used to amplify the signal generated by the oscillator. This is important as the oscillator’s output signal is typically too weak to be used in an application directly. The amplifier increases the signal strength to an appropriate level for use.

The in-line attenuator is used to adjust the amplitude of the output signal. This can be used to either reduce the signal strength or increase it. This is especially important in applications where the signal should not be too strong as it may interfere with the operation of other components, such as a radio receiver.

Finally, the control circuit is responsible for setting the frequency of the oscillator and any necessary tuning or adjustment. This circuit is usually made up of several components, such as a variable resistor, varactors and capacitors, to tune and adjust the oscillator. Depending on the application, it may also be used to change the duty cycle or phase of the signal.

In conclusion, the ASCSM-19.440MHZ-LY-T is a frequency oscillator that is designed for microwave and millimeter-wave applications. It is made up of several components, including a frequency-stable oscillator, amplifier, in-line attenuator and a control circuit. The purpose of these components is to generate a signal at the desired frequency, and, if necessary, with an adjustable amplitude. Additionally, the control circuit can be used to adjust the frequency and any other application-specific parameters.

The specific data is subject to PDF, and the above content is for reference