AT17C010A-10PI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT17C010A-10PI configuration prom is a small, low-cost, one-time programmable memory component designed for the storage of field-programmable gate array (FPGA) configuration data. The configuration memory provides a defined, time-limited operation of the FPGA when the component is powered-on and simplifies the system design process by incorporating the logic of a design into the FPGA at system start-up.

The AT17C010A-10PI configuration memory contains 1K bit of nonvolatile Flash-based memory data that can be programmed with the FPGA configuration by utilizing a high-speed parallel connection. Specifically, the AT17C010A-10PI includes 10 address pins, 10 data pins and one chip select pin along with a low voltage programmable interface (LVPI). All necessary pins of the flash memory are accessible through the 0.100 inch section of the component.

The AT17C010A-10PI has several benefits over other configuration proms due to its low power consumption and its industry-standard WSIAT2M conformal coating package. The low power consumption of the AT17C010A-10PI provides maximum battery life or helps to reduce system power consumption, thus allowing for environmental savings. In addition, the architecture of the component provides increased programming flexibility, allowing the FPGA designer to make changes to the design without having to reprogram the component.

The AT17C010A-10PI is designed to be used in conjunction with the Xilinx design flow, which includes the ability to automatically generate a configuration bitstream based upon a device and design. Once the design is complete, the bitstream is loaded into the configuration memory and used to configure the FPGA. The AT17C010A-10PI operates in both the read and write modes, allowing for the design parameters to be easily changed or updated without reprogramming the component.

The AT17C010A-10PI configuration prom can be used in both low-end applications and high-end applications. In low-end applications, such as consumer electronics, the AT17C010A-10PI can be used to store a pre-programmed configuration for the FPGA in order to minimize time-to-market. For example, the configuration can be programmed into the component prior to the device being shipped to the customer, allowing the device to be powered on and booted up with the pre-programmed configuration.

In high-end applications, where system performance is critical, the AT17C010A-10PI can be used to store multiple configurations that can be rapidly changed and updated based on system demand. This allows the FPGA to be reconfigured on the fly to support the most demanding applications. In addition, the AT17C010A-10PI can be used in field updateable applications, where the configuration can be updated remotely via a network connection, eliminating the need to physically access the device to make changes and updates.

Overall, the AT17C010A-10PI configuration prom is a versatile memory component that is well-suited for use with FPGAs. The component offers a low power consumption, a compact package size, and a wide range of programming and update capabilities. With its features, the AT17C010A-10PI can help to simplify the overall design process and reduce time-to-market for a wide range of applications, from low-end consumer electronics to high-end systems.

The specific data is subject to PDF, and the above content is for reference