AT17LV512-10SI

Series:	--
Packaging:	Tube
Part Status:	Active
Programmable Type:	Serial EEPROM
Memory Size:	512kb
Voltage - Supply:	3 V ~ 3.6 V, 4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	20-SOIC
Base Part Number:	AT17LV512

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT17LV512-10SI is a memory configuration proms for Field Programmable Gate Arrays (FPGAs). It is used in applications ranging from consumer electronics, automotive electronics, automotive, industrial, medical and aerospace applications. This unit is an integrated circuit that holds the configuration data and is required to operate the target FPGA.The AT17LV512-10SI is a 512-KBit non-volatile Memory Configuration PROM. It is designed as an electrical replacement for FPGAs and CPLDs with a flash serial interface. It is manufactured using a 16-Mb flash technology available in 65nm process. This device is designed with integrated write control, ECC (error-correction code) and 3-stage voltage protection features to allow for flexible operation and protection against unexpected power loss.It is the primary configuration memory device for Altera FPGAs. An FPGA is an integrated circuit used to store and execute a set of instructions. It is programmed through an external memory device known as a configuration memory device. FPGAs are used in many applications, ranging from consumer electronics, automotive electronics, automotive, industrial, medical and aerospace applications.At its core, AT17LV512-10SI is a non-volatile random access memory (NVRAM) device that reads data out of a memory array and writes it back again. It is programmed with a predefined pattern of data that is used to control how the target FPGA is operated. The configuration data contains instructions which configure the FPGA for a particular task. This enables an FPGA to be reprogrammed as needed for various applications.AT17LV512-10SI is designed to provide a reliable and long-term programming solution for FPGA applications. It has a high reliability and low write latency with access times of 70 MHz. It is designed to operate over the extended temperature range from -40°C to +85°C. With its low power consumption of 30 mW and an endurance of 10 000 write cycles, it is an ideal device for portable or embedded applications.The AT17LV512-10SI is available in a variety of packages, including TQFP and QFN. It is also available in two versions to meet specific customer requirements. The first version is the "standard" AT17LV512-10SI, which is a complete non-volatile memory device with a 16-Mb flash memory array. The second version is the AT17LV512-10SI with an on-board programming logic. This version is designed for applications where an on-board Memory Controller is not required.In terms of operation, the AT17LV512-10SI is capable of providing programmed or updated configuration data to an FPGA device. It can read and write data both sequentially and randomly and can be programmed in-system. The device contains two programming modes, which are the "PROGRAM" mode and the "VERIFY" mode. The PROGRAM mode is used to program the memory array and the VERIFY mode is used to verify the programmed data. The device can also be tested by the MEMORY TEST mode.In conclusion, the AT17LV512-10SI is a memory configuration proms for Field Programmable Gate Arrays (FPGAs). It is used in applications ranging from consumer electronics, automotive electronics, automotive, industrial, medical and aerospace applications. It is designed to provide a reliable and long-term programming solution for FPGAs. It is available in a variety of packages, has a high reliability and low write latency, operates over the extended temperature range from -40°C to +85°C and has a low power consumption of 30 mW.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description