AT24C04-10PC-2.7

Memory is an integral component of all digital devices, from the simplest microcontrollers to the most powerful computers. The AT24C04-10PC-2.7 is one such component, a low-cost, low-power serial EEPROM that provides efficient memory storage for a wide range of applications.

The AT24C04-10PC-2.7 is a 4K (4096 bit) EEPROM that operates at an I2C bus interface. It is available in a variety of package types, including 8-pin PDIP, 8-pin SOIC, and 8-pin TFDIP. It is also available in a range of densities, from the 4K to 16K bits. This wide range of densities gives it the flexibility to accommodate a variety of applications.

The AT24C04-10PC-2.7 EEPROM offers extensive features, including low power consumption, low cost, high endurance, and wide operating temperature (-55˚C to +125˚C). The device also features a low standby current of 0.2μA and low active current of 5mA maximum. This makes it ideal for applications where the power consumption must be kept to a minimum.

In addition, the device is developed with a standard I2C interface that makes it easy to integrate into existing systems. The I2C interface also helps to reduce the bus cost and board space of the system. The AT24C04-10PC-2.7 also has built-in write protection, which helps to ensure data integrity in the event of power failure.

Overall, the AT24C04-10PC-2.7 is a cost-effective and reliable memory solution that is ideal for a wide range of applications. It can be used for data storage and retrieval in embedded systems, automotive systems, industrial and medical equipment, consumer products, and more.

Application Field

The AT24C04-10PC-2.7 is an ideal memory solution for a wide variety of application fields, including embedded systems, automotive systems, industrial and medical equipment, consumer products, and more.

For embedded systems, the AT24C04-10PC-2.7 provides efficient data storage and retrieval capabilities, making it an ideal solution for products such as microcontrollers, development boards, and networking equipment. The device\'s low power consumption makes it ideal for battery-powered applications, as well as for applications where power efficiency is a key requirement.

The AT24C04-10PC-2.7 is also an excellent choice for automotive applications, as it can withstand high temperatures, vibration, and humidity. This makes it an ideal solution for automotive ECUs (Electronic Control Units) and infotainment systems, as well as in-vehicle entertainment systems and navigation systems.

In addition, the AT24C04-10PC-2.7 is also suitable for industrial and medical applications. In industrial applications, it can be used for machine control and automation, data acquisition and storage, and fault monitoring. In medical applications, it can be used for patient monitoring, patient data storage, and medical device control.

Finally, the AT24C04-10PC-2.7 can also be used in consumer products such as digital cameras, MP3 players, and portable gaming consoles. Its low power consumption and wide range of densities make it ideal for use in these types of products.

Working Principle

The AT24C04-10PC-2.7 operates on the I2C bus. This bus can connect up to 128 devices, making it an ideal solution for applications that require multiple memory components.

On the I2C bus, the AT24C04-10PC-2.7 operates as a slave device. This means that it can receive communications from a master device, but cannot initiate communications on its own. The communications between the master and slave devices are synchronous, meaning that each device must wait for the other device to finish before it can send or receive any data.

The communications between the AT24C04-10PC-2.7 and the master device are based on a series of commands. The most common command is the write command, which is used to store data in the EEPROM. The AT24C04-10PC-2.7 also supports read, erase, and address commands. In addition, the device also supports several other specialized commands, such as a block write/read mode and a hardware reset command.

The AT24C04-10PC-2.7 also features built-in write protection, which helps to ensure data integrity in the event of power failure. This write protection prevents data overwrites and inadvertent data erasures.

Overall, the AT24C04-10PC-2.7 is a cost-effective, reliable, and low-power memory solution that is suitable for a wide range of applications. Its I2C bus enabled design, low power consumption, and wide range of densities make it an excellent choice for many types of electronic devices.