AT24C512C-CUM-T-834

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT24C512C-CUM-T-834 is an integrated non-volatile memory device from Atmel Corporation. It is suitable for a wide range of applications and is often used in large-scale industrial, automotive, consumer electronics and medical systems. The device is a 512 kilobit EEPROM (Electrically Erasable Programmable Read Only Memory) with unlimited write and erase cycles and a long data retention time.

The AT24C512C-CUM-T-834 is a serial EEPROM and offers various features such as low power consumption, high write speed, high endurance, good data retention, and ECC (Error Correction Code) protection. It is available in different package options, including SOIC-8, PDIP-8, and TSSOP-8. It can operate over a wide temperature range of -40°C to +85°C and has a wide input voltage range of 2.7V to 5.5V. Other features include a page write cycle of 5ms, random write cycle of 5ms, and an access time of 250ns.

The AT24C512C-CUM-T-834 is primarily used for code and data storage. Its non-volatile memory allows for the device to retain information without the need for power, making it ideal for applications that require frequent data updates or data logging. The AT24C512C-CUM-T-834 is also well-suited for use in automotive systems or embedded systems, where it can provide long data retention and high write speeds. Additionally, the device is suitable for use in medical devices, consumer electronics, and large-scale industrial systems, such as gas and electricity meters.

The AT24C512C-CUM-T-834 is a two-wire serial EEPROM, which is accessed through a sequential access protocol. It has a two-wire serial interface which is used to write data to and read data from the device. Data is written to a page of the device at a time, and each page can be written up to 64 bytes. Addresses are addressed in 8-bit chunks, each 8-bit word within the page being accessible as a separate location. Each page must be written to before proceeding to the next page.

The write operation requires the START, WRITE, and STOP commands. After the START command is sent, the memory address is shifted to the device and the device is in the write mode. The next byte is the write data, which is written to the specified address. The STOP command is then sent, which indicates the end of the write sequence. Once the write sequence is complete, the address counter will be automatically incremented.

The read operation requires the START, READ, and STOP commands. After the START command is sent, the memory address is shifted to the device, and the device is in the read mode. The device will then begin to send its data byte by byte, until the STOP command is sent. Once the STOP command is sent, the address counter will be incremented by one.

The AT24C512C-CUM-T-834 is a versatile memory device which is well-suited for a wide range of applications. It offers high speed write and read operations, a long data retention time, and ECC protection, making it a reliable memory device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference