AT24C256W-10SI-1.8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT24C256W-10SI-1.8 is a 256Kbit EEPROM standard serial IC, part of the I2C® family from ATMEL. It is a non-volatile memory device which can be used to store data in small electronic projects. This particular chip has a 256Kbit capacity and is available in a variety of formats including SOIC (surface mount), TSSOP (Thin small-outline package), and PDIP (plastic dual-in-line package).

The AT24C256W-10SI-1.8 is typically used in applications that require volatile storage. It can be used to store program code, configuration parameters, and sensor readings. It can also be used to store data that needs to be retained in the absence of power, such as critical settings that need to be maintained even when the system is powered down. In addition, the chip has the capability to write burst mode data. This enables large sections of data to be written to the chip quickly and efficiently.

One of the main advantages of the AT24C256W-10SI-1.8 is its low power requirements. The chip draws approximately 2mA from a +5V supply, making it suitable for use in battery-powered devices, where saving energy is critical. The chip features both a write-protect and write-enable pin, which makes the design of the circuitry around it quite simple. It also has an overtemperature protection feature to prevent data corruption during extreme temperatures.

The AT24C256W-10SI-1.8 is based on an I2C® protocol, which is a two-wire interface, providing a simple communications protocol between multiple devices. The chip is compatible with the I2C® protocol and provides multiple slave addresses, allowing multiple devices to be connected to the same bus. The chip also supports the I2C® standard fast-mode and supports up to 4MHz data transfer rates.

The main difference between the AT24C256W-10SI-1.8 and other EEPROMs is its working principle. Instead of using transistors for data storage, the chip uses Fowler-Nordheim tunneling, which is a process where electrons are tunneled through insulators to the silicon substrate of the chip. This process is much more reliable than the traditional transistor-based methodology, providing a longer lifetime for the chip.

The AT24C256W-10SI-1.8 is an EEPROM chip that is used to store information in an efficient and reliable manner. It is capable of storing large amounts of data and is suitable for use in applications that require low-power operation. The chip is based on an I2C® protocol and uses a unique working principle based on Fowler-Nordheim tunneling. With its wide availability and low power consumption, the AT24C256W-SI-1.8 is a great choice for a variety of memory applications.

The specific data is subject to PDF, and the above content is for reference