AT24C08B-TSU-T Integrated Circuits (ICs)

AT24C08B-TSU Memory

The AT24C08B-TSU memory is an 8K-bit (1K x 8) serial EEPROM. It is an integral non-volatile memory device used for storing data. It offers fast access with read and write times of 1.5 ms and 70 ms, respectively.The AT24C08B-TSU offers data access via the two-wire serial I2C interface. It has been designed to be low-power and highly reliable, making it an ideal device for applications that need to store information for long periods.The AT24C08B-TSU is available in an 8-pin package and is available in a variety of memory sizes, ranging from 256 bits to 8,192 bits. It is capable of supporting several speeds, with a normal access time of 1.5 ms and a fast access time of 70 ms.The AT24C08B-TSU has a wide range of uses, including automotive, industrial, medical, and consumer applications. It is also used as an EEPROM replacement in many applications, offering a reliable and energy efficient storage solution.

Application Field

The AT24C08B-TSU is used in a variety of applications, including automotive, industrial, medical, and consumer applications. It can be used for data logging, machine parameter configuration, and programmable logic control. It can also be used in industrial applications, such as hazard prevention and safety, as well as medical applications, such as patient data logging and tracking.

Working Principle

The working principle of the AT24C08B-TSU is based on the two-wire serial interface, I2C. I2C is a serial combination of two signal lines—SCL (Serial Clock) and SDA (Serial Data). The two lines are connected to the master, which sends commands and addresses to the slave. The slave device receives the commands and signals and performs the necessary operations.The I2C interface allows for the AT24C08B-TSU to transfer 8 bits of data at a time. The communication is done through the two-wire serial line, with the slave device sending the data to the master. The master then sends out a clock signal to the slave device, which then sends out the next 8 bits of data. This process continues until the master has received all of the desired data.

The AT24C08B-TSU has an internal write/read pointer, which is used to keep track of the address of the last data that was either written or read. This pointer is incremented after each write or read operation, allowing for the device to address the next memory location without the need for microcontroller intervention. The AT24C08B-TSU also supports an open drain architecture, which allows for the system to remain in an unused state for extended periods of time. This helps to reduce power consumption.

Conclusion

The AT24C08B-TSU is a reliable and energy-efficient non-volatile memory device. It is used in a variety of applications, including automotive, industrial, medical, and consumer applications. It offers fast access times and a wide range of memory sizes. With an open drain architecture and an internal write/read pointer, the AT24C08B-TSU provides a reliable and efficient way to store data.