AT24C164-10PI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT24C164-10PI is an integrated circuit which is often used in areas such as memory applications and data storage. The device is a low-cost memory solution that offers high density, low power consumption, high speed and performance. AT24C164-10PI comes in a 64-pin package which is primarily used for applications such as serial EEPROM for mainframes, embedded systems, micro-controllers and data logging. For example, it can be used in manufacturing, medical and automotive industries.

The AT24C164-10PI is part of the I2C family of EEPROMs. It features a 16-bit address size, 7 bit slave addressing and clock rates up to 400 kHz. It has a maximum data transfer rate of 400 kbits/sec. This part comes in an 8 pin SOIC package and has a maximum operating temperature of 85°C. It also has a wide operating voltage range of 1.8V to 5V.

AT24C164-10PI is used mainly in devices that require non-volatile memory storage. This type of memory is non-volatile, meaning that it can store information even when the power is not applied. The device can be used to store any type of data such as configuration settings, user preferences, application code, etc. In micro-controllers and embedded systems, the device can be used to store parameters and configurations which are required for the system to function properly.

The working principle of the AT24C164-10PI is based on the I2C protocol. I2C stands for Inter-Integrated Circuit and is a synchronous, two-wire bidirectional bus which is used for exchanging data between two devices. In the case of the AT24C164-10PI, two wires are required: a serial data line and a serial clock line. The master device, which is normally a microcontroller or microprocessor, initiates the communication by sending a start condition followed by a slave address. The slave device, in this case the AT24C164-10PI, then responds with an acknowledge signal.

The transfer data is then written or read to and from the AT24C164-10PI in the form of 8-bit data bytes. The master device can also read back the data bytes and confirm that the data has been successfully written to the EEPROM. The communication between the master device and the AT24C164-10PI is concluded by sending a stop condition which terminates the slave response.

The AT24C164-10PI is used in many applications and provides cost-effective and reliable non-volatile memory storage. It offers high speed transfer rates, low power consumption and a wide range of operating voltage and temperature. The device is ideal for data logging, memory applications, embedded systems and any other applications that require non-volatile memory storage.

The specific data is subject to PDF, and the above content is for reference