AT24C16A-10TI-2.7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT24C16A-10TI-2.7 is a serial interface EEPROM with a 16K bit EEPROM. It is an advanced product manufactured by Atmel Corporation’s semiconductor subsidiary whose main purpose is to facilitate the storage and retrieval of data. The AT24C16A-10TI-2.7 is part of the Atmel family of integrated components which is known for its efficiency, flexibility and reliability. It is categorized as a memory device owing to its primary function of providing an organized storage space for data.

The AT24C16A-10TI-2.7 is a two-wire serial memory with a 16K bits capacity that is organized as 2048 bytes by 8 bits. It is composed of two separate EEPROMs, each containing 8Kbits of EEPROM and 2 bytes with 1 address space, which provides access to the 64-byte page write buffer. It has a maximum write cycle of up to 10K and can withstand an effective write operation cycle of up to 6K. The device is also designed with a maximum read cycle of 0.8usec and the device is equipped with a read/write protection feature.

The AT24C16A-10TI-2.7 can be used in a wide range of applications which require the storage and retrieval of data. This includes consumer electronics, industrial equipment, medical instruments, and data acquisition systems. It is also a suitable choice for applications where large volumes of data must be stored, due to its 16K bit capacity. It can also be used in applications where efficiency and accuracy is critical since it offers a maximum write cycle of up to 10K and a maximum read cycle of 0.8usec. Another advantage of the device is that it is designed with a read/write protection feature which lends further security to the stored data.

The AT24C16A-10TI-2.7 has a very simple working principle. The device is based on an EEPROM which utilizes an array of cells. The cells are divided into bytes and each byte contains 8 memory bits. The 8 bits can then be read, written, or erased. The devices can be accessed either one byte at a time or in larger blocks, depending on the task at hand. There are two separate control wires, one which receives instructions from the system, and another which transmits data to the system.

In order to write data to the device, a write operation must be initiated with a proper write command, followed by the address and the data to be written. Then, the data write cycle is executed, which performs the actual write operation. During the write cycle, a write protect signal will turn off, in order to prevent any corruption of the data on the device. This is followed by a read operation which is used to verify the write operation and then the write protect is re-enabled. The read operation requires only an address, followed by 8 read cycles.

The AT24C16A-10TI-2.7 can also be used in advanced applications like digital identification, error detection, and read/write protection. These applications require advanced programming techniques like the use of data encryption, clock synchronization, and the implementation of protocol-level principles. It also comes with an auto-write feature, which is used to detect any irregularities in the writing process and is used as a safeguard against any corrupt data.

The AT24C16A-10TI-2.7 is a reliable and efficient serial EEPROM that is used for the storage and retrieval of data. With its 16Kbit capacity and advanced features, it can be used in a variety of applications where large amounts of data must be stored and read accurately. Its simple two-wire connection and maximum write and read cycle periods offer good performance and reliability, while its advanced features like data encryption and read/write protection ensure the security of stored data.

The specific data is subject to PDF, and the above content is for reference