AT24C16B-PU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT24C16B-PU is a memory that has a wide range of applications and various working principles. It is an industrial standard two-wire sequential access memory with a storage capacity of 16 Kbits and an access time of 1.5 ms maximum. The device has a low supply current of 8 mA max and requires a min. supply voltage of 4.5 V. Moreover, the device is also capable of operating in single-byte and page write modes.

The AT24C16B-PU is a non-volatile EEPROM, meaning its contents will not be lost when it is disconnected from power source. The device is also able to maintain its preserved memory contents even with a decades of inactivity. In addition, the AT24C16B-PU is able to memory up to 8Kbyte of internal data, with a low power consumption.

The AT24C16B-PU has several applications, including digital data logging, data transfer between two microcontrollers, memory expansion for devices with limited memory, security access, and authentication. It is also gaining interest for use in contactless portable computing devices, such as digital biometric devices, smart cards and other security systems.

The AT24C16B-PU works by storing data in a 16-bit register that is addressable by 16-bit word addresses. Each word address is mapped to a 16-bit data word stored in the memory up to 8Kbyte in total. This means that the memory can store 8,192 individual bytes of data. The power consumption of the device is extremely low, allowing it to be used in portable, low-power applications.

The AT24C16B-PU works in three modes: read, write and erase. The read mode allows the device to read data stored in the memory, while the write mode enables users to store data in the memory. The erase mode is used to clear the contents of the memory. The device also supports both single byte read/write and page write operations, which allow users to write a maximum of 64 bytes at once.

The AT24C16B-PU also features an on-chip reset pin that has a built-in programming voltage which helps to avoid static shocks when the power is applied to the device. The device has built-in memory protection circuitry that prevents unintentional programming of the device.

The AT24C16B-PU is an economical and reliable memory that is suitable for applications where data preservation is required in conditions of power loss. Its low-power setup makes it well-suited for portable and long-term applications, such as biometric security systems, medical technology, and other industrial and automotive applications.

The specific data is subject to PDF, and the above content is for reference