AT24C512C-U1UM-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT24C512C-U1UM-T is an EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit. This memory chip belongs to the family of devices commonly referred to as Serial EEPROMs ― electrically erasable memories that usually have a serial (parallel) interface. Such memories can replace traditional EPROMs and are often used when space is limited or when data updating or reading/writing operations need to be performed frequently and quickly. This specific model integrates 524,288 bits of EEPROM inside a small 8-pin DIP (dual in-line package).

The AT24C512C-U1UM-T memory is most often used in applications that require the storage of data that is sometimes volatile and can be changed during the lifetime of the system. It is suitable for storing I/O configurations, parameters, audio, graphical and numerical data, etc. It is also used as a non-volatile alternative to RAM, allowing data to survive a power outage. Other applications include electronic toll tags, automotive component logging, data logging, cashless vending and payment processing.

To store data, the memory needs to be written to by providing the desired data along with the address at which the data should be stored. The AT24C512C-U1UM-T device follows the I2C (Inter-Integrated Circuit) protocol in order to perform a write operation. For a read operation, the same protocol needs to be followed and the corresponding address needs to be specified. In both cases, the memory chip returns a signal confirming that the operation has been performed correctly.

The serial interface of this memory chip utilizes the two-wire I2C protocol, which configures the device as a slave when used. As such, it can be managed and addressed either directly by a master device (sending commands and receiving data) or via a bus controller. A control line (SDA) is used for data transmission, and a clock line (SCL) is used for timing the data transfer. Both lines support data rates up to 400 kbit/s (100 kHz) when connected to a 3.3 V supply voltage.

The AT24C512C-U1UM-T EEPROM is available in a wide variety of package types, such as SOP-8 (Small Outline Package) and also in pin-compatible versions that feature 8-pin DIPs or 8-pin SOICs (Small Outline Integrated Circuits). A 3.0 V to 5.5 V power supply is required, and the power consumption of the device is minimal, enabling it to be used in a variety of power-sensitive applications.

In summary, the AT24C512C-U1UM-T memory chip is a versatile, high-performance memory device that can be used in a wide range of embedded applications. With its low power consumption and serial interface, it is well-suited for a variety of tasks, such as data logging, automotive component logging, and cashless vending and payment processing. It is also capable of storing large amounts of data, providing the capacity needed for a broad range of advanced applications.

The specific data is subject to PDF, and the above content is for reference