AT25040A-10TU-1.8-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT25040A-10TU-1.8-T is a type of memory, more specificly a serial EEPROM. It is often used in automotive, industrial and medical applications due to it\'s high reliability and durability. It is a non-volatile, electrically-erasable, pro grammable read-only memory (EEPROM) device, with a capacity of 1 Mbit (= 128 Kbyte).

At a basic level, the chip is a memory device that stores information, much like an old-fashioned floppy disk. However, instead of using magnetic marks on a disk, the AT25040A-10TU-1.8-T uses electrons, stored on dielectric layers inside the chip. By “programming” these electrons via voltage, information can be stored on the memory chip. The chip then uses this stored information to help other circuitry in whatever system it is used in. It is this programming of the chip which makes it suitable for use in so many different applications.

The AT25040A-10TU-1.8-T houses 8 pin contacts that are used to interface with circuits. The pins act as both an input and an output, versus the traditional on/off input/output setup of most microprocessors. A wide range of information can be accessed and stored on the chip, including temperature, data recordings, and user settings. In automotive applications, for example, the chip is used to store information about a vehicle’s behavior, such as total mileage and the last known speed.

The unit is also very durable, with a wide operating temperature range from -40°C to +85°C. This allows the EEPROM to be used in a variety of environments ranging from cold air planes to hot factory floors. The chip also has 10,000 write cycles and 10 year data retention, meaning it is highly reliable and durable. It operates is a low power standby mode of 8 mA and on a maximum power rate of 120 mA, making it both efficient and reliable for for long applications.

There are two main methods of programming the AT25040A-10TU-1.8-T: an I2C interface, and a parallel “direct” programming option. The I2C interface is the preferred method, as it allows for the write cycles to be programmed in the EEPROM. This is important when there are multiple application steps or a high number of write cycles. The direct programming is much faster, but is not recommended for long duty cycles due to the lack of write cycle control. In either case, the chip will allow for the reprogramming of the stored information using either a voltage or a software based program.

To wrap up, the AT25040A-10TU-1.8-T is a serial EEPROM memory device that is used in many automotive, industrial, and medical applications. It stores information via electrons, making it highly reliable and durable. There are two main methods of programming it, which allow for different levels of control of the write function. It operates on a low standby mode with a maximum power rate, making it efficient and ideal for long applications.

The specific data is subject to PDF, and the above content is for reference