AT25SF081-MAHD-T Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flash memory, also known as a memory chip or memory module, is a semiconductor memory device that is used for storing data or information in a non-volatile way. AT25SF081-MAHD-T is a kind of Flash Memory with a wide range of applications. It is a 8M-bit Flash Serial Memory with a monolithic structure in a SOIC-8 package.

The AT25SF081-MAHD-T Serial Flash device provides 8M-bit of non-volatile storage. It is organized as 1,048,576 to 8 bit words, which are accessed by the SPI protocol. The device offers the highest performance in its class with a data rate up to 52MHz, and a Gold Standard write cycle time of 10ms per byte. It also has an End of Program (EOP) latency of less than 8 clock cycles.

AT25SF081-MAHD-T has many applications in many industries. It is most commonly used in portable communication, embedded control, and audio systems. Its fast access speeds, minimum power consumption, and low cost make it ideal for embedded applications. It can also be used in consumer electronics, such as digital cameras, MP3 players, PDAs, and handheld video game consoles. Additionally, it can be used in industrial applications, such as vehicle control monitors and point-of-sale systems.

The working principle of AT25SF081-MAHD-T can be divided into two parts. The first part is its data transfer operations, which includes both reading and writing operations. All data transfer operations use the same basic protocol, which can be summarized as follows: the Flash memory holds 8 bits of data and these 8 bits of data are shifted in or out in a serial fashion. To read data from the Flash memory, the host sends a Read command to the chip followed by an address. The data stored in that address is then read and shifted out bit by bit. To write data to the Flash memory, the host sends a Write command followed by the address and data to be written. The data is then written to the specified address in the Flash memory.

The second part of the working principle of AT25SF081-MAHD-T is its erase operations. Erasing the Flash memory consists of clearing all data stored in a certain address or block. The erase operations use the same basic protocol as data transfer operations. To erase data in the Flash memory, the host sends an Erase command followed by an address. All data stored in that address is then cleared.

In summary, AT25SF081-MAHD-T is a Flash Serial Memory with a wide range of applications in many industries due to its fast access speed, minimum power consumption and low cost. The working principle of the chip can be divided into two parts, which are data transfer operations and erase operations.

The specific data is subject to PDF, and the above content is for reference