AT25080AN-10SI-2.7-T

Memory

AT25080AN-10SI-2.7-T is an advanced non-volatile memory designed for storage. It is a serial electrically erasable programmable read-only memory (EEPROM) with a typical access time of 2.7 microseconds.

The AT25080AN-10SI-2.7-T has 8 Kbits (1 Kbyte) of memory capacity organized as 512 x 16-bit words. The device features high speed firmware-controlled sector protection and secured data storage capability. Programming is done on the sector basis regardless of the sector size.

The AT25080AN-10SI-2.7-T has an advanced single-wire protocol which makes it ideal for communications, automotive and industrial applications. It has an internal address counter that allows multiple words to be addressed and read/written using single serial communication sequence. Its Low Voltage Programming (LVP) allows programming and erasing at low voltage ranges. It also has power-on / reset protection for data retention at power-off state.

The AT25080AN-10SI-2.7-T has a wide range of application fields, from industrial equipment and automotive control systems to home appliances and medical devices. It is also suitable for communications, handheld devices and robotics. It is used in a variety of applications where data retention and protection is essential.

The working principle of AT25080AN-10SI-2.7-T is as follows: The device features a dedicated onboard data storage controller, which enables the storage and retrieval of data in a secure manner. The controller is programmed by supplying the required commands to the EEPROM through a single bus or multiple bus interface. The commands tell the controller the type of memory operation to be performed, such as reading, writing or erasing of the data.

The device also features an internal data register, which stores the data being written or read from the EEPROM memory. This data register is used to move data into and out of the EEPROM memory without having to individually program or erase each word of the EEPROM. The controller performs the necessary operation and stores the result in the data register.

The AT25080AN-10SI-2.7-T also has an additional feature for data protection. Its software-controlled sector protection allows for read, write and erase operations to be secured within a desired sector, thus preventing any accidental or unauthorized actions on the memory. The sector protection registers can also be programmed to permanently lock the sector, preventing any further programming or erasing operations within the sector.

Overall, the AT25080AN-10SI-2.7-T is an advanced and powerful non-volatile memory ideal for use in applications requiring secure data storage and retrieval, such as automotive, medical and communications systems. Its wide range of application fields and its advanced features make it a popular choice for many embedded applications.