AT25DF041A-SSHF-T Integrated Circuits (ICs)

Description

The AT25DF041A-SSHF-T is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer-based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT25DF041A-SSHF-T, with its erase granularity as small as 4 Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices The physical sectoring and the erase block sizes of the AT25DF041A-SSHF-T have been optimized to meet the needs of today’s code and data storage applications. By optimizing the size of the physical sectors and erase blocks, the memory space can be used much more efficiently.

Because certain code modules and data storage segments must reside by themselves in their own protected sectors, the wasted and unused memory space that occurs with large sectored and large block erase Flash memory devices can be greatly reduced. This increased memory space efficiency allows additional code routines and data storage segments to be added while still maintaining the same overall device density.

The AT25DF041A-SSHF-T also offers a sophisticated method for protecting individual sectors against erroneous or malicious program and erase operations. By providing the ability to individually protect and unprotect sectors, a system can unprotect a specific sector to modify its contents while keeping the remaining sectors of the memory array securely protected. This is useful in applications where program code is patched or updated on a subroutine or module basis, or in applications where data storage segments need to be modified without running the risk of errant modifications to the program code segments. In addition to individual sector protection capabilities, the AT25DF041A-SSHF-T incorporates Global Protect and Global Unprotect features that allow the entire memory array to be either protected or unprotected all at once. This reduces overhead during the manufacturing process since sectors do not have to be unprotected one-by-one prior to initial programming.

Specifically designed for use in 2.5-volt or 3-volt systems, the AT25DF041A-SSHF-T supports read, program, and erase operations with a supply voltage range of 2.3V to 3.6V or 2.7V to 3.6V. No separate voltage is required for programming and erasing.

Features

    1. Single 2.3V - 3.6V or 2.7V - 3.6V Supply

    2. Serial Peripheral Interface (SPI) Compatible

         – Supports SPI Modes 0 and 3

    3. 70 MHz Maximum Clock Frequency

    4. Flexible, Uniform Erase Architecture

         – 4-Kbyte Blocks

         – 32-Kbyte Blocks

         – 64-Kbyte Blocks

         – Full Chip Erase

    5. Individual Sector Protection with Global Protect/Unprotect Feature

        – One 16-Kbyte Top Sector

        – Two 8-Kbyte Sectors

        – One 32-Kbyte Sector

        – Seven 64-Kbyte Sectors

    6. Hardware Controlled Locking of Protected Sectors via WP pin

    7. Flexible Programming Options

        – Byte/Page Program (1 to 256 Bytes)

        – Sequential Program Mode Capability

    8. Fast Program and Erase Times

         – 1.2 ms Typical Page Program (256 Bytes) Time

         – 50 ms Typical 4-Kbyte Block Erase Time

         – 250 ms Typical 32-Kbyte Block Erase Time

         – 400 ms Typical 64-Kbyte Block Erase Time

    9. Automatic Checking and Reporting of Erase/Program Failures

  10. JEDEC Standard Manufacturer and Device ID Read Methodology

  11. Low Power Dissipation

          – 5 mA Active Read Current (Typical)

          – 15 µA Deep Power-down Current (Typical)

  12. Endurance: 100,000 Program/Erase Cycles

  13. Data Retention: 20 Years

  14. Complies with Full Industrial Temperature Range

  15. Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options

           – 8-lead SOIC (150-mil and 208-mil Wide)

           – 8-pad Ultra Thin DFN (5 x 6 x 0.6 mm)

Pin Descriptions and Pinouts

Packaging Information