AT25F1024AN-10SU-2.7

Memory is a fundamental component of microelectronic systems. It provides an area for data storage and retrieval. The memory offer a wide range of features, including storage capacity, clock speed, read and write capabilities, and power. The AT25F1024AN-10SU-2.7 is an example of a memory component. This component is a serial Flash memory for use in embedded applications.

The AT25F1024AN-10SU-2.7 is a 1 megabit (128 KB) serial Flash memory. It is ideal for applications that require a secure, high-capacity memory solution. The component is organized as 65536 8-bit words, with a typical access time of 25 ns. It has an operating voltage range of 2.7 to 3.6 V and an endurance cycle of 100000 program/erase cycles. This component also features a low power consumption and a patented DataFlash architecture that allows the device to operate at lower power levels than other Flash ROMs.

The AT25F1024AN-10SU-2.7 is a low voltage version of the AT25F1024AN-10SU serial Flash memory. This version features an enhanced power-saving technology, which reduces its power consumption to as little as 1.4 mA during active read operations. It also supports a low voltage write mode which reduces active programming current to as low as 20 μA. This component is available in an 8-pin SOIC and an 8-pin PDIP package.

The AT25F1024AN-10SU-2.7 is widely used in embedded applications, such as data storage and retrieval, device configuration storage, data acquisition memory, medical device memory, and other applications requiring non-volatile, secure storage. It is also used as a code storage device in various embedded systems, such as automotive, industrial, and consumer electronics.

The AT25F1024AN-10SU-2.7’s access speed and low power consumption are key features that make it attractive for a variety of applications. The component also features an enhanced programming bit rate of up to 400 kHz, which allows it to be programmed 10 times faster than regular Flash ROMs. The component features an on-board controller and sector protection, allowing the device to be programmed in non-controlled environment and making it resistant to unwanted modifications.

The AT25F1024AN-10SU-2.7 can be programmed using either a parallel or serial interface with the appropriate hardware and software. In programming mode, data is loaded into the device with an Active Low Reset signal. The data is then written to the device using the Serial Programming Mode and verified using the ECC check. The data is then stored in the device’s memory.

In summary, the AT25F1024AN-10SU-2.7 is a versatile serial Flash memory component used in a variety of embedded applications. It features a low power consumption and a high rate of programming. The component also features a wide operating voltage range, an enhanced programming bit rate, and sector protection. The AT25F1024AN-10SU-2.7 is a reliable and cost-effective solution for embedded applications.