AT29BV010A-15TU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT29BV010A-15TU Memory
The AT29BV010A-15TU is a member of the Atmel AT29BV00 series of Flash memory devices. This series of memory devices consists of electrically erasable/programmable read-only memory (EEPROM). This device provides an ideal solution for low-pin-count, cost-sensitive applications requiring reliable nonvolatile memory storage. The AT29BV010A-15TU is a single-chip CMOS flash memory device organized as 128 Kbit that is accessed by a 16-bit wide data bus.Application Field
This device provides an ideal solution for low-pin-count, cost-sensitive applications requiring reliable nonvolatile memory storage. It is typically used in cell phones, digital cameras, portable media players and voice recorders. It is also used in automotive applications such as car navigation systems, CD changers and tire pressure monitoring systems. Additionally, the device can be used in a variety of other applications, including memory cards, wireless communications, industrial controls, and medical equipment.Working Principle
The AT29BV010A-15TU is based on an electrically erasable and programmable memory (EEPROM) cell array which enables fast and reliable writing and erasure. The device is a non-volatile memory device that uses flash technology to store data. The EEPROM array is organized as 128 Kbit. The device is accessible by 8/16-bit data buses and is fully enclosed in a 20-pad SOIC package. The memory has a self-timed write cycle with a maximum write time of 6.5ms. The device works using a charge pump circuit which enables operation at minimal voltages of 1.8V.The device is accessible through a three-state command and data statement. Control functions are enabled by the serial interface, which uses a 9-bit word group that is provided to the device along with address, write enable, and output enable signals. The 9-bit word group consists of eight control/data bits and one write enable bit which is used to write data. Data can be written to the device in either byte or page modes. In page write mode, up to 64 bytes of data can be written in one write cycle. In byte write mode, each byte is individually programmed, providing faster access.The memory also includes a system reset input, which can be used to clear the write buffer. The device also includes an on-chip erase block with a maximum erase time of 200ms. The device uses three separate voltage supplies: VCC, VPP, and VSS. VCC serves as the data transfer voltage and VPP as the write voltage.The device also includes an integrated phase locked loop (PLL) circuit, which enables stable and reliable operation of the device over a wide temperature range. The device is compatible with standard JEDEC and Atmel CMOS programming algorithms, making it easy to integrate into existing designs.Conclusion
The AT29BV010A-15TU is a single-chip CMOS flash memory device organized as 128 Kbit that is accessed by a 16-bit wide data bus. This device provides an ideal solution for low-pin-count, cost-sensitive applications requiring reliable nonvolatile memory storage. The device is typically used in cell phones, digital cameras, portable media players, voice recorders, automotive applications and a variety of other applications. The memory also includes a system reset input and an integrated phase locked loop circuit. The device is compatible with standard JEDEC and Atmel CMOS programming algorithms, making it easy to integrate into existing designs.

The specific data is subject to PDF, and the above content is for reference