AT29C010A-15PC

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Memory Type:	Non-Volatile
Memory Format:	FLASH
Technology:	FLASH
Memory Size:	1Mb (128K x 8)
Write Cycle Time - Word, Page:	10ms
Access Time:	150ns
Memory Interface:	Parallel
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C (TC)
Mounting Type:	Through Hole
Package / Case:	32-DIP (0.600", 15.24mm)
Supplier Device Package:	32-DIP
Base Part Number:	AT29C010

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT29C010A-15PC is an integrated circuit made up of two independent storage components: flash memory and EEPROM. It offers integrated 4 Megabits (512K bytes) of non-volatile, electrically erasable memory. The flash memory has a parallel interface and needs only one power supply to operate. The EEPROM has a serial interface and requires two power supplies for operation, one for write and erase functions, and the other for read operations. Both components have integrated intelligence to prevent accidental writes, data corruption, and device wear-out.AT29C010A-15PC is used in a wide variety of applications, including automotive, industrial, medical and telecommunications. In automotive applications, the device is often used to store immobilizer program codes, and in industrial applications, it is used for programmable logic controllers and industrial process controllers. In medical applications, it is used for medical imaging systems and medical monitors. In telecommunications, it is used in switching systems and routers.The AT29C010A-15PC is an embedded memory device that can be used in a variety of applications. It is an ideal choice for applications that require high levels of reliability, long endurance, and efficient operation. It is also used in low cost and low power applications in which flash memory or EEPROM is used.The working principle of the AT29C010A-15PC is based on two key technologies, namely flash memory and EEPROM. The flash memory is the main storage component, while the EEPROM is used for control functions. The flash memory is a non-volatile memory technology that stores data in blocks called sectors. Each sector is composed of a number of memory cells, which are interconnected in a grid-like structure. When a data bit needs to be programmed, a voltage is applied to the cells in the sector and the appropriate bit is set. Similarly, when the data bit needs to be erased, a special erasing voltage is applied to reset the cells. The EEPROM, on the other hand, is an electrically erasable memory technology that uses an array of transistors to store data. Data can be written or read from the array using a serial or parallel interface.By combining the two technologies, the AT29C010A-15PC provides high read/write speeds and long endurance performance. The device also provides a number of features that make it ideal for applications that require reliable operation, such as data retention, write protection, addressability, and wear leveling. The device also provides on-chip calibration and temperature-controlled programming and erase cycles, which help to ensure consistent performance over a wide temperature range. Additionally, the device operates in a 3.3V power range, allowing it to be used in a variety of application environments.In conclusion, the AT29C010A-15PC is an ideal choice for applications that require efficient, reliable, and cost-effective embedded memory solutions. The device integrates two memory technologies into a single package and provides a number of features to ensure reliable operation in a wide range of operating conditions. The device is used in a number of different applications, such as automotive, industrial, medical, and telecommunications. Finally, the device integrates intelligence to prevent accidental writes, data corruption, and device wear-out.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description