AT83C23OK203-Z1TUM

AT83C23OK203-Z1TUM Application Field and Working Principle

The AT83C23OK203-Z1TUM is a single-chip microcontroller product with 32-bit ARM Cortex-M0 CPU core. It features a high performance, high integration, low power consumption and stable operation, and is widely used in various control applications, such as automation temperature control, motor control and peripheral control.

AT83C23OK203-Z1TUM has a total of 182 pins, including 7KB SRAM, 256KB internal Flash, 16KB SRAM and 64KB internal program memory. It has powerful on-chip peripherals, including 7 12-bit A/D converter channels, 1 analog comparator channel, one 8-bit timer/counter, two 16-bit timer/counter, one 9-bit timer/counter, one 12-bit ADC, one 10-bit PWM, one I2C and two SPI interfaces, two UARTs, etc.

AT83C23OK203-Z1TUM has two operations modes, run mode or stop mode depending on power supply requirements. In stop mode, the main clock is shut down while the internal RAM and registers are kept powered. When the supply voltage is lower than the programmed value, the device automatically enters the “stop 0”and “stop 1” modes, and when the required voltage is above the programmed value, the device automatically switches to the run mode.

AT83C23OK203-Z1TUM employs a variety of internal protection circuits, including coding and system integrity checking, clock locking and Watch Dog monitoring. It has a wide range of temperature detection and tempering capabilities, as well as a range of protection mechanisms for under-voltage, over-voltage, and failure. In addition, AT83C23OK203-Z1TUM has a watchdog timer for system monitoring, power failure detection and resetting.

AT83C23OK203-Z1TUM can detect 16-level signals from the environment and interact with the environment, making it easier and more convenient to control the actuator, such as motors, solenoids, fans, and relays. When an event occurs, AT83C23OK203-Z1TUM decodes, processes and gives an appropriate response according to the program. The specific working principle is to first measure the input signal, then compare it with the set value in program, and finally perform a preset operation.

AT83C23OK203-Z1TUM is suitable for a wide range of applications, such as home automation, industrial automation, etc. It can be used in temperature control, motor control, device communication, etc. In addition, AT83C23OK203-Z1TUM is a very reliable choice for development, with its powerful performance, low energy consumption and robust protection measures.