AT89S8253-24PU

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

The AT89S8253-24PU is a low-power, high-performance CMOS 8-bit microcontroller with 12K bytes of In-System Programmable (ISP) Flash program memory and 2K bytes of EEPROM data memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set and pinout. The on-chip downloadable Flash allows the program memory to be reprogrammed in-system through an SPI serial interface or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with downloadable Flash on a monolithic chip, the Atmel AT89S8253 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. The AT89S8253-24PU provides the following standard features: 12K bytes of In-System Programmable Flash, 2K bytes of EEPROM, 256 bytes of RAM, 32 I/O lines, programmable watchdog timer, two data pointers, three 16-bit timer/counters, a six-vector, four-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89S8253 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power-down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset. The on-board Flash/EEPROM is accessible through the SPI serial interface. Holding RESET active forces the SPI bus into a serial programming interface and allows the program memory to be written to or read from, unless one or more lock bits have been activated.

2. Features

    1. Compatible with MCS®51 Products

    2. 12K Bytes of In-System Programmable (ISP) Flash Program Memory

        – SPI Serial Interface for Program Downloading

        – Endurance: 10,000 Write/Erase Cycles

    3. 2K Bytes EEPROM Data Memory

        – Endurance: 100,000 Write/Erase Cycles

    4. 64-byte User Signature Array

    5. 2.7V to 5.5V Operating Range

    6. Fully Static Operation: 0 Hz to 24 MHz (in x1 and x2 Modes)

    7. Three-level Program Memory Lock

    8. 256 x 8-bit Internal RAM

    9. 32 Programmable I/O Lines

  10. Three 16-bit Timer/Counters

  11. Nine Interrupt Sources

  12. Enhanced UART Serial Port with Framing Error Detection and Automatic Address Recognition

  13. Enhanced SPI (Double Write/Read Buffered) Serial Interface

  14. Low-power Idle and Power-down Modes

  15. Interrupt Recovery from Power-down Mode

  16. Programmable Watchdog Timer

  17. Dual Data Pointer

  18. Power-off Flag

  19. Flexible ISP Programming (Byte and Page Modes)

        – Page Mode: 64 Bytes/Page for Code Memory, 32 Bytes/Page for Data Memory

  20. Four-level Enhanced Interrupt Controller

  21. Programmable and Fuseable x2 Clock Option

  22. Internal Power-on Reset

  23. 42-pin PDIP Package Option for Reduced EMC Emission

  24. Green (Pb/Halide-free) Packaging Option

3. Pin Configurations

4. Package Information