ATA6563-GBQW1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ATA6563-GBQW1 Application Field and Working Principle

Interface - Drivers, Receivers, Transceivers

ATA6563-GBQW1 is a device used in automotive electronics to provide interface solutions between two or more systems or components. It is primarily used for communication between controllers/microcontrollers and actuators. It is a high-performance 3-channel LIN Transceiver with integrated LDOs, which enables versatile and reliable data transmission in both directions (tx-rx).

The ATA6563-GBQW1 consists of a microcontroller, a logic device (LIN transceiver), a voltage regulator, and a receiving device. The microcontroller is connected with the logic device and it takes care of the communication protocol like LIN protocol, CAN protocol and I2C communication. It also has triggering interrupts that enable it to detect errors during data transmission. The voltage regulator provides the necessary voltage to run the microcontroller and acts as a safety mechanism by cutting off power when a certain voltage is exceeded. The receiving device is connected to the logic device and it passes the data to the logic device to be decoded. This data then can be used by the microcontroller to control the actuator.

The ATA6563-GBQW1 has many advantages. It offers a wide range of CAN bitrates ranging up to 8Mbps, allowing for longer distances between controllers and actuators. This also supports LIN 2.2 and is capable of operating with longer cable distance and higher data rates. It also features low power consumption and wake-up for peripheral devices quickly. Moreover, self-testing capabilities allow for easier diagnostics. Furthermore, the integrated LDOs minimize overall design complexity and cost.

ATA6563-GBQW1 is mainly applicable for automotive applications, such as powertrain and infotainment systems. For example, it is used in cars for Gauge Cluster Display, Door Lock System, and On-Board Diagnostics (OBD-II) applications. It is also used for other embedded applications such as Household Appliance, Solar System, Printed Circuit Board, Building Automation and Industrial Automation.

The working principle or operation of the ATA6563-GBQW1 is quite simple. It is a tristate device, which means it has three primary states: high, low, and off. In the high state, it will send out a signal to the receiver; in the low state, it will receive a signal from the sender; in the off state, it does not allow for any signal to pass. First, the microcontroller sends out a signal to the logic device, which encodes this signal into the correct protocol. It then passes this signal to the voltage regulator, to condition the voltage according to the required specifications. It will then be sent to the receiver, where it will be decoded by the logic device and used by the microcontroller. This data can then be used to control an actuator or other devices in the system.

To summarize, the ATA6563-GBQW1 is a transceiver device used in automotive applications which enables two way communication between two or more systems. It is designed to suit multiple communication protocols like LIN, CAN and I2C. It has various advantages such as low power consumption, wide range of CAN bitrates and self-testing capabilities. It can be used for Gauge Cluster Display, Door Lock System and On-Board Diagnostics.

The specific data is subject to PDF, and the above content is for reference