ATAK51004-V2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ATAK51004-V2 is part of the RF Evaluation and Development Kits, Boards classification. Its application use is to quantify link-level performance for cellular applications such as LTE, UMTS/GSM. It is a complete, integrated base-station system evaluation test solution for small-cell and macro cell environments. This kit is designed to accommodate many different base station applications, it is very closely configured to a virtual multi-standard eNodeB system.

The baseband evaluation kit includes two major components that are essential for performance testing of a base-station system; the RF transceiver subsystem and the TX SW (Tx Software). The RF transceiver subsystem is made up of an ATAK51004-V2 chip and other omponets that make up the RF interface and signal chain. TheTX SWis responsible for providing the processing and control functions to the user interface.

The ATAK51004-V2 chip is the key part of the RF evaluation and development kits. It is a full-featured, integrated RF transceiver that supports multiple protocols and multiple bands. The chip was specifically designed for base-station performance evaluation and provides a powerful set of features for system testing. The chip is capable of transmitting and receiving high-speed signals up to 15 Mbps over various frequency bands. It also has built-in DSP capability and is tuned for maximum performance. It is designed to be integrated with other application-specific components such as FPGA, PCM and MPEG-2 decoders to allow complete system integration and testing.

The ATAK51004-V2 chip works in conjunction with other components to evaluate various signal performance and parameters related to the linked base station system. The chip includes built-in hardware and software components to allow base-station system configuration, monitoring, and analysis. This includes the following:

• I/Q baseband generation and capture capability
• Link budget analysis
• RF link quality assessment
• Error vector magnitude (EVM) analysis
• Phase noise analysis
• RMS, peak-to-average ratio, and power spectral density analysis
• Link coordination and synchronization
• Sensitivity measurements
• Modulation accuracy

The ATAK51004-V2 chip is also integrated with a wide range of base-station components and systems such as RF antennas, RF switches, RF power amplifiers, microwave diplexers, UHF transceivers and other hardware and software components. All of these components interact with the chip to provide system designers with the ability to conveniently analyze, test and evaluate the performance of their system. In addition, the chip supports multiple communication protocols like GSM, LTE, UMTS/HSDPA as well as other standards-based radio access technologies.

The ATAK51004-V2 chip is designed to be integrated into a wide variety of existing system designs. The chip supports a wide range of low-cost, high-performance RF components, resulting in a flexible system design. It is designed to be easily scalable and can be easily modified for new standards and applications. The chip provides advanced features such as RF transceiver calibration, dynamic control and monitoring, and optimized signal to noise ratio control.

The ATAK51004-V2 chip is used for a variety of applications in the cellular industry, including base station evaluation and validation, system control and optimization, protocol evaluation, host/device emulation, and data analysis. Its integrated hardware and software modules make it easy to integrate it into existing systems while providing advanced RF capabilities. Its performance and versatility make it a great addition to any system.

The specific data is subject to PDF, and the above content is for reference