ATS320B-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are key elements in any circuit and come in a variety of shapes and sizes, based on the type of connection they are to make. The ATS320B-E is a surface mount 32.768 kHz crystal that is used to create a frequency source in a wide range of systems and applications. In this article, we’ll explore the applications and working principles of the ATS320B-E crystal.

Uses of the ATS320B-E Crystal

The ATS320B-E surface mount crystal is most often used in wearable and mobile devices, but it can also be found in many other applications. Here are some of the most popular applications for the ATS320B-E crystal:

• Smartwatches and fitness trackers (e.g. Apple Watch)
• Smartphones, tablets and other mobile devices
• Arduino and Raspberry Pi projects
• GPS systems and navigation equipment
• Gadgets and electronics that require precise timing

The 32.768 kHz frequency produced by the ATS320B-E crystal is an ideal frequency for oscillators used in such applications. It is also the frequency needed for the RTC (Real-Time Clock) section in many microcontroller applications, consuming only a small amount of power. This makes the ATS320B-E an ideal choice when looking for a crystal with high accuracy and low power consumption.

Working Principles of the ATS320B-E Crystal

An oscillator is a circuit element that converts a DC signal into AC signal of a certain frequency. The frequency of the output signal is determined by the LCR (Inductor, Capacitor and Resistor) components that are connected to a signal source. The ATS320B-E crystal is an example of an oscillator that uses a crystal as its frequency source.

The ATS320B-E crystal is a parallel cut crystal with an X-axis vibration frequency of 32,768 Hz. It is built using three layers of quartz, which are stacked together to form a monolithic body. The quartz is then cut using electrodes in opposite directions to create the parallel cut configuration.

The crystal works by vibrating in resonance with an applied voltage. This vibration allows for a steady, stable output frequency – in this case, the exact frequency of 32,768 Hz. When connected to a circuit, it works as an electrical frequency source, generating a precisely timed square wave output.

The frequency of the crystal can be adjusted using the oscillator circuit that it is connected to. This is useful in applications where the output frequency needs to be adjusted, such as when measuring time intervals or generating precise frequency signals. The amount of adjustment possible depends on the frequency range of the oscillator circuit.

Conclusion

The ATS320B-E is a surface mount crystal that produces a precise frequency of 32.768 kHz. It is used in a wide variety of applications, including wearable devices, mobile devices, Arduino and Raspberry Pi projects, navigation equipment and other gadgets requiring precise timing. Its frequency can be adjusted using the oscillator circuit connected to it, allowing for precise frequency control in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference