B130LB-13-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single are semiconductor devices which are used to convert AC to DC, or to provide a path for current to flow in only one direction. The B130LB-13-F device is a single-phase silicon bridge rectifier which is designed for general purpose full-wave rectification. This device is available in the form of a flat leaded package and is suitable for use in a variety of applications including power supplies, inverters, motor controls, and converters.

The B130LB-13-F device is made of diode from a single piece of high-grade silicon. It contains two PN junction diodes or two anti-parallel back-to-back connected diodes, which are used together to form a full-wave rectifier. The device has a forward voltage drop of ~1V, reverse leakage current of ~2 uA, and a forward current rating of 130 A. It also has a built-in resistor which limits the inrush current and allows the DC bus voltage to slowly rise to its nominal level.

When the B130LB-13-F device is connected in a bridge configuration, it is able to rectify both the positve and negative cycles of the incoming AC waveform, which results in a DC output. During the positive half cycle of the waveform, diode D1 conducts, while during the negative half cycle, diode D2 conducts. This results in a current flow which is not continuous, but rather in the form of pulses. This is because when the AC waveform crosses a particular voltage level, the diodes switch off and the current flow stops.

The main applications of the B130LB-13-F device are in full wave rectification, power supplies, inverters and motor control. It can be used in AC-DC conversion applications such as battery chargers, DC input power supplies and DC-DC voltage converters. It can also be used in switch mode power supplies (SMPS) and AC waveform shaping applications.

The B130LB-13-F device also has some other advantages. It is very robust and can withstand high currents and voltages. It also has a low forward voltage drop, which allows for higher efficiency in power converters. In addition, it operates over a wide range of temperatures and humidity, making it suitable for use in harsh environmental conditions.

In conclusion, the B130LB-13-F device is an ideal rectifier for a variety of applications. It can handle high power and operate reliably in different environmental conditions. It is cost effective and requires minimal maintenance. Its features make it a great choice for those looking for a high quality, efficient rectifier.

The specific data is subject to PDF, and the above content is for reference