B270-13 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A B270-13 diode is a single rectifier diode in the TO-220 package. It is a very common diode used in many applications. This diode is typically used in power electronics applications. It is used to rectify alternating current (AC) into direct current (DC). The B270-13 rectifier diode is ideally suited for high voltage power supplies, power factor correction and other power electronics applications.

The B270-13 is a three-terminal device with a cathode, anode, and a third terminal. The latter is normally connected to the cathode to control the forward voltage drop across the device. The B270-13 diode is a very versatile and economical device for power conversion and inverter designs. It has a typical forward voltage drop of 400V, with a maximum of 500V. It is also rated at 20A, and can handle currents up to 30A. It has a very low reverse voltage leak, which is typically less than 10uA.

The actual working principle behind the B270-13 rectifier diode is based on the fact that electricity only flows in one direction through the diode. This means that when the anode of the diode is connected to the positive side of the AC voltage and the cathode is connected to the negative side, then a current will flow through the diode from the positive side to the negative side, but not from the negative side to the positive side. This is the basic principle of a rectifier diode.

The actual application field for the B270-13 is in power supplies and power factor correction. This is because of its high current rating and low forward voltage drop. It is also ideal for switching supplies, inverters and voltage-regulating devices. It is commonly used in rectifier circuits, voltage regulators and other power applications.

The B270-13 diode is a widely used three-terminal rectifier diode with a forward voltage drop of 400V, and a maximum of 500V. It is ideal for power supplies, power factor correction, switching supplies, inverters and voltage-regulating devices. It has a very low reverse voltage leak, with typical values less than 10uA. It is a very versatile and efficient device for power conversion and inverter designs.

The specific data is subject to PDF, and the above content is for reference