B39321B3761Z810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are electronic filters used in wireless communication systems for signal processing and signal enhancement. They are used to select and filter out certain frequencies from the incoming signal and reject other frequencies. The B39321B3761Z810 SAW filter is a high-performance, low-cost solution for a wide range of wireless applications. It has excellent selectivity and high-frequency response, making it suitable for a variety of applications.

The B39321B3761Z810 SAW filter consists of two parts: a filter element and a printed circuit board (PCB). The filter element is made up of a series of longitudinal waveguides, usually made of quartz, connected by transverse waveguides. The PCB contains the electrical circuitry that controls the signal selection and filtering process. The SAW filter can be tuned by changing the dimensions of the waveguides or by adjusting the electrical characteristics of the circuitry.

One of the main applications of the B39321B3761Z810 SAW filter is in mobile phones. It is used to select the desired frequency of the incoming signal and reject other, unwanted frequencies. It is also used in radio receivers to improve reception and reduce interference. The filter can be tuned to select the desired frequency and reject other nearby frequencies. This allows radio receivers to be more selective and reduce the amount of noise they receive.

The B39321B3761Z810 SAW filter also has applications in Wi-Fi networks. It is used to increase signal strength by filtering out interfering signals. It can also be used to reduce power consumption by limiting the bandwidth of the signal. By filtering out unwanted frequencies, the filter can reduce signal losses and improve performance.

The working principle of the B39321B3761Z810 SAW filter is quite simple. An incoming signal is passed through the filter element. The waveguides in the filter element absorb energy from the passing signal. The waveguides then emit energy at a different frequency, which is then passed through the PCB to the output. The output frequency is selected and filtered as required by the circuitry on the PCB.

In summary, the B39321B3761Z810 SAW filter is a high-performance, low-cost solution for a wide range of wireless applications. It is used to select and filter out desired frequencies from the incoming signal and reject other frequencies. It is used mainly in mobile phones and radio receivers to improve reception and reduce interference. The working principle of the filter is quite simple, and it can be tuned by changing the dimensions of the waveguides or adjusting the electrical characteristics of the circuitry.

The specific data is subject to PDF, and the above content is for reference