B39711B8832P810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are a special type of RF filter used to clean up signal quality by removing various types of unwanted spurious noise. The B39711B8832P810 is a SAW filter designed to filter out spurious signals in a wide range of applications.

At the core of the B39711B8832P810 is the SAW filter design. The SAW technology works by using a crystal quartz substrate on which are etched tiny transducers that act as tiny vibrators. When a signal is applied, the transducers convert the signal into an acoustic wave that propagates along the surface of the quartz crystal. The signal is first converted to an electrical signal and then changed back to its original signal form which is the output.

The B39711B8832P810 is designed to filter signals in a wide range of applications. It works in two dimensions: the frequency pass band and the stop band. In the pass band, it allows a certain range of frequencies to pass through while attenuating all other frequencies. In the stop band, it attenuates a specific range of frequencies while allowing the rest to pass through. The B39711B8832P810 can also be used in high-speed data transfer applications for filtering out interference from outside sources.

The B39711B8832P810 also features a high-performance level shifter. This is an integrated circuit that converts the incoming signal from the source to an appropriate level for the filter, ensuring that none of the signal is lost due to electrical noise or mismatches.

The B39711B8832P810 is designed to be used in both consumer and industrial applications. In consumer applications, it is often used in receivers for cleaning up signals from antennas or other sources. It is also used in communication systems, such as mobile phones, to filter out unwanted signals and increase signal strength.

In industrial applications, the B39711B8832P810 is commonly used in RF measurement systems for clean high-frequency signals. It is also used to filter out interference from outside sources such as cellular towers or other RF emitters. The filter is also used in military applications where it is used to filter out hostile or unfriendly signals.

The B39711B8832P810 is a highly versatile SAW filter that can be used in a variety of applications. Its high-performance level shifter and wide frequency pass band and stop band make it a popular choice in both consumer and industrial applications. It is an excellent choice for any signal filtering requirements.

The specific data is subject to PDF, and the above content is for reference