B39725B1728H810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface acoustic wave filters, or SAW filters, are components used in many electronic devices to filter out certain frequencies from a signal. The B39725B1728H810 is a type of SAW filter designed for use in radio frequency applications. This filter consists of two or more thin layers of conductive material, interspersed with a piezoelectric material. When a voltage is applied to the filter, it creates a surface acoustic wave, which passes along the length of the filter. By varying the frequency of the voltage, different frequencies will be reflected off of the alternating conductive-piezoelectric layers, allowing certain frequencies to pass through and blocking others.

The B39725B1728H810 filter is designed for use in cellular or RF communications systems. It offers very good isolation and return loss performance, making it well suited for this type of application. It is a popular choice for use in transmitters and receivers in base stations for 2G and 3G mobile networks, as well as enhanced data rate for GSM evolution (EDGE) applications. The filter also provides excellent protection from interference from other systems that may be operating nearby, ensuring clear, consistent communication.

The working principle of the B39725B1728H810 SAW filter is relatively straightforward. As mentioned previously, the filter consists of two or more conductive layers interspersed with a piezoelectric material. When a voltage is applied to the layers, a surface acoustic wave (SAW) is generated, which travels through the filter. As it passes through the alternating conductive-piezoelectric layers, certain frequencies will be reflected off of the layers, while others will be allowed to pass through. By varying the frequency of the voltage, different frequencies can be reflected or allowed to pass through the filter.

The filter can be configured to allow certain frequencies through and block others. This is done by carefully designing the conductive-piezoelectric layers, and also by varying the DC bias voltage applied to the layers. By adjusting the DC bias voltage, the frequency response of the filter can be changed, allowing different frequencies to pass through the filter. The filter can also be configured to perform multiple bandpass functions.

The B39725B1728H810 SAW filter is a reliable and cost-effective solution for radio frequency applications. Its wide bandwidth and good isolation make it well suited for use in mobile radio and data systems. It is easy to configure for multiple bandpass functions, and offers good protection from interference.

The specific data is subject to PDF, and the above content is for reference