B39811B8316P812

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters are a key component of electronic systems, as they are small, inexpensive and accurate. The B39811B8316P812 is a basic SAW filter specifically designed to meet the needs of typical low-power radio-frequency (RF) applications. It is comprised of four individual filter stages: two low-pass and two high-pass stages. In this article, we will look at the application field and working principle of the B39811B8316P812 SAW filter.

Application Field

The B39811B8316P812 SAW filter is suitable for use in a range of low-power RF applications, such as cell phone, wireless LAN, and wireless audio systems. It is also suitable for use in low-noise applications, such as in medical and consumer electronics. It is commonly used to filter out unwanted frequencies and improve signal-to-noise ratio.

Working Principle

The working principle of a SAW filter is based on the acoustically-coupled transmission line effect. This is a phenomenon that occurs when acoustic or radio waves interact with a material medium. In this case, it is the piezoelectric medium that is located inside the SAW filter. As a result, the acoustically-coupled transmission line effect is used to generate a passband or band-stop filter for a given range of frequencies.

A SAW filter works by forcing all incoming signals through a multi-stage acoustic waveguide. This waveguide is comprised of a series of piezoelectric crystals, which are connected in an alternating pattern. As the signal passes through each crystal, it meets a unique acoustic boundary, which either allows or blocks the passage of the signal. The effect of this process is to isolate and filter out any unwanted frequencies.

The B39811B8316P812 SAW filter is composed of two low-pass and two high-pass stages. Each stage consists of one piezoelectric resonator that causes the incoming signal to vibrate at a specific frequency. This specific frequency is determined by the characteristics of each individual piezoelectric resonator, and the resulting signal is then routed through a filter to further reduce any unwanted frequencies.

Overall, the B39811B8316P812 SAW filter provides superior filtering performance in low-power RF applications. It is also capable of providing high-accuracy filtering, and can be used to control signal-to-noise ratio in a range of electronics devices. As such, it is a reliable and cost-effective solution for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference