B39871B8603P812S5

Series:	*
Part Status:	Last Time Buy

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to B39871B8603P812S5 SAW Filters

Surface acoustic wave filters (SAW Filters) come in many different models and types, and the B39871B8603P812S5 is no different. These types of filters are cost-effective and robust, making them the perfect choice for many applications where traditional filters are either too slow or too expensive. A SAW filter is generally composed of interdigital electrodes on a piezoelectric substrate. The electrodes will have both input and output ports which are connected by a series of pulse shapers. The pulse shapers are responsible for dividing up the electrical energy input into two parts, one with a higher frequency and another with a lower frequency. This process is known as band-pass filtering.

Application Fields of B39871B8603P812S5 SAW Filters

Due to its small size, low cost and high selectivity, the B39871B8603P812S5 SAW Filter is ideal for a number of applications. In the areas of wireless communications such as cellular, bluetooth and wifi, the filter will allow for a narrow frequency to be chosen and filter out unwanted signals from the primary transmitted signal. This helps to reduce interference and improve reception. The filter can also be found in industrial and laboratory applications such as sonar tracking and acoustic instruments such as amplifiers and mixers. In addition, the filter has also been used in medical devices such as hearing aids and prostheses.

Working Principle of B39871B8603P812S5 SAW Filters

When an electrical signal is applied to the interdigital electrodes on the B39871B8603P812S5 SAW Filter, it will cause the piezoelectric substrate to vibrate. These vibrations will travel in both directions along the substrate, as longitudinal waves. The incoming wave will be split into a high frequency signal and a low frequency signal due to constructive or destructive interference, depending on its position along the substrate. The output will depend on the design of the electrodes. An electrode can be designed to block one frequency while allowing another to pass through, thus achieving a band-pass filter. The filter\'s response will be more strongly affected by the input than the output, as it is the input that determines the waveform and frequency of the output. The B39871B8603P812S5 SAW Filter is widely used due to its small size, cost effectiveness, and robustness, making it the ideal solution for a variety of applications. Its ability to filter out unwanted frequencies and reduce interference makes it perfect for applications in wireless and industrial devices, along with other specialized applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description