B39851B8647P812

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SAW Filters and B39851B8647P812

SAW filters (Surface Acoustic Wave filters) are electronic filters that are commonly used in radio and audio systems. They are used to filter out unwanted signals in the radio spectrum while allowing desirable signals to pass. SAW filters are superior in terms of size, power consumption, and performance compared to other frequency-selective filters.

The B39851B8647P812 is a common example of a SAW filter. It is a high-performance, low-loss, low-noise filter designed for general-purpose applications in the broadcast, communication, surveillance, and consumer electronics markets. It is made of a thin layer of Nickel-based ferrite material, which allows it to quickly respond to an electrical signal and separate frequencies quickly and efficiently.

Application Field of B39851B8647P812 SAW Filter

The B39851B8647P712 SAW filter has a wide range of applications in the broadcast, communication, surveillance, and consumer electronics results. It is suitable for use in radio receivers, transmitters, cellular networks, and audio systems.

In radio receivers, it can be employed to reduce RF interference, improve signal-to-noise ratio, and increase selectivity in frequency selection. In transmitters, it can be used to reduce the noise emitted in the radio spectrum, allowing more efficient transmission. In cellular networks, it can be used to reduce interference between cells, improve service quality, and increase data rates. In Audio systems, it can be used to filter out unwanted noise, allowing more isolated audio signals to be produced.

Working Principle of B39851B8647P812 SAW Filter

The B39851B8647P812 SAW filter uses a Nickel-based ferrite material to separate frequencies. It works by converting an incoming electrical signal into a mechanical wave, which runs along the surface of the ferrite material. As the wave travels, it encounters different frequencies, and these frequencies are absorbed by the ferrite material.

At the end of the ferrite material, the wave is converted back into an electrical signal, which contains only the frequencies that are allowed to pass through the filter. This eliminates any interference from unwanted frequencies and allows the desired signal to pass through. This is how the B39851B8647P812 SAW filter works to filter out unwanted frequencies and ensure that only the desired signal is passed.

Conclusion

The B39851B8647P812 SAW filter is a high-performance, low-loss, low-noise filter suitable for a wide variety of applications in the broadcast, communication, surveillance, and consumer electronics sectors. It works by converting an incoming electrical signal into a mechanical wave, which is then absorbed by the ferrite material. The remaining frequencies are then converted into an electrical signal that can be used by the system. This ensures that only the desired signal is passed, eliminating any interference from unwanted frequencies.

The specific data is subject to PDF, and the above content is for reference