B39871B3762Z810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters are a type of filter used to restrict the frequency of a signal so that it can be more accurately tuned to meet the output requirements of a particular application. In essence, a SAW (Surface Acoustic Wave) filter is an electronic component that is used to pass certain frequencies of a signal while rejecting all others. It is the filtering element of an electronic system, which is usually incorporated into a circuit board or electrical device. The B39871B3762Z810 is a SAW filter that is used in various applications.

The B39871B3762Z810 is a type of low-loss, wide band-pass SAW filter that is typically used in radio frequency (RF) receivers. It is composed of two SAW filters that are combined into one assembly. This SAW filter is designed to pass signals in a range of about 918 MHz to 941 MHz with high selectivity and low losses. It can be used in applications such as television tuners, radar systems, satellite receivers, and cellular phones. Additionally, it is suitable for use in other applications that require wide band-pass filters with low-loss characteristics.

The B39871B3762Z810 operates by capturing, or “trapping”, only the frequency of the signals that are within the pass band of the filter. This is accomplished by means of the SAW structure, which consists of two transducers and two metal reflectors. The first transducer, known as the input transducer, is connected to the input port of the filter. It produces an acoustic wave that travels in the SAW structure. As it travels, it reflects off of the metal reflectors and creates a standing wave pattern.

The standing wave pattern increases and decreases in intensity depending on the frequency of the incoming signal. This phenomenon is known as the frequency-selective response of the filter. When a signal with a frequency within the pass band of the filter enters, it is captured by the transducer and the standing wave increases in intensity. The signals outside the pass band of the filter are rejected because the standing wave decreases and breaks up into smaller waves.

The B39871B3762Z810 filter is usually connected to an RF receiver circuit that contains an amplifier and other components that can vary the gain of the filter. By adjusting the gain of the filter, the frequency of the incoming signal can be further restricted to the specific range of the pass band. This allows only the frequencies that are desired to be passed to the output of the filter.

In summary, the B39871B3762Z810 SAW filter is a low-loss, wide band-pass filter that can be used in various radio frequency applications. Its frequency-selective response makes it ideal for capturing and passing signals in a specific range. By connecting it to an RF receiver circuit and adjusting the gain, further restriction of the frequency can be achieved, allowing it to more accurately meet the output requirements of the application.

The specific data is subject to PDF, and the above content is for reference