B39881B8009P810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters serve as essential components in the implementation of modern communications, radar, and medical systems. The B39881B8009P810 is an example of such filters. This filter is a dual-mode filter that yields two transmission peaks in the passband region of the spectrum. It is also a low pass filter, with a cut-off frequency of 4 MHz. This enables it to suppress signals with frequencies higher than 4 MHz.

This device is especially suitable for use in communications and receiver systems that require lower noise levels and improved stereo response. It provides a significant advantage over traditional filters in applications where wideband operation is required.The signal spectrum of the B39881B8009P810 is relatively flat and can be used to implement signal-processing chains with high dynamic ranges.

The working principle of the B39881B8009P810 is based on the use of a unique transducer technology, which is based on interdigital transducers (IDT). IDT technology allows the filter to generate two transmission peaks. This is accomplished by having specific acoustic properties. The IDT effectively controls the signal spectrum response by controlling the shape and size of the acoustic wave propagating through the medium.

The IDT is composed of several interdigital electrodes that are arranged on a substrate. The number and size of the interdigital electrodes affect the wave velocity of the propagating wave and thus its frequency and amplitude. By adjusting these parameters, it is possible to tune the filter to the desired passband region. In addition, the frequency response of the filter can be further adjusted by controlling the position of the IDT within the acoustic medium.

In order to achieve the desired response, the B39881B8009P810 filter is designed to contain two modes of operation. The first is the passband mode, which is the mode used to pass the signal desired frequency spectrum. The second is the stopband mode, which is used to reject the signal that is outside of the desired frequency range. The stopband mode enables the filter to reject noise in the signal received from the source.

The B39881B8009P810 is well suited for use in communications and receiver systems that require lower noise levels and improved stereo response. Its application can also be useful in medical systems that require accurate and precise manipulation of signals. By controlling the shape and size of the acoustic wave propagating through the medium, the B39881B8009P810 filter can be used to effectively control the signal spectrum of a system. Due to its unique characteristics, the B39881B8009P810 filter is an excellent choice for use in modern communications, radar, and medical systems.

The specific data is subject to PDF, and the above content is for reference