B483C-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, specifically Bridge Rectifiers such as the B483C-2, are a type of power component that is commonly used in electrical engineering applications that includes power switching, signal conditioning and even ac-direct current(AC/DC) conversion. In its most basic form, it consists of four diodes that are arranged in a bridge configuration and is used to convert alternating current (AC) to direct current (DC). Though the components are simple in concept, understanding its field of application and its working principle is important to optimize the performance of the component.

B483C-2 Application Field

The B483C-2 is a low voltage, four diode bridge rectifier component designed for ac-dc power conversion applications. This component is primarily used for rectification of low to medium AC power supply for industrial applications and circuit building projects in which a DC power source of specified voltage and current ratings is required. In addition to this, the component is also used in various consumer electronics such as chargers, adapter and actuators that are powered by a DC voltage source derived from the ac-dc power converter.

B483C-2 Working Principle

At a high level, diode rectifiers are designed to allow current to flow in one direction from a high voltage (positive) to low voltage (negative) end of the component. The bridge rectifier is composed of four diodes arranged in a bridge configuration. The diodes are such that when carrying an AC current, a half-wave rectified output of established peak values is produced. If a load resistance is connected to the output, the peak value of the rectified current is supplied to the load resistance.

When the alternating current is applied to the diode bridge, either of the two sides of the input has a positive polarity while the other side has a negative polarity. This causes the current to travel in a single direction passing through one side and then back out the other. At the same time, the second passing side of the circuit gets reversed, which causes the diodes to prevent the current from passing back through the same side. This is what results in the single direction flow of current across the bridge, the output of which is a DC current.

The B483C-2 has been designed to provide a low voltage AC to DC conversion at a high current ratings and switch frequency. This makes it an attractive choice for power rectification applications, specifically for those with low voltage, high current and high frequency requirements.

Conclusion

The B483C-2 is one of the most commonly used bridge rectifier components for AC to DC power conversion in electrical engineering applications. It is designed to provide a low voltage AC to DC conversion at a high current ratings and switch frequency. Understanding its field of application and the basic principles that govern its working helps users to exploit the potential of this component to the fullest.

The specific data is subject to PDF, and the above content is for reference