Allicdata Part #: | CC1889-ND |
Manufacturer Part#: |
B483F-2T |
Price: | $ 27.24 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Sensata-Crydom |
Short Description: | MOD DIODE PWR 35A 480VAC PNL MNT |
More Detail: | Bridge Rectifier Single Phase Standard 1.2kV QC Te... |
DataSheet: | B483F-2T Datasheet/PDF |
Quantity: | 10 |
1 +: | $ 24.51960 |
10 +: | $ 23.36670 |
50 +: | $ 22.28950 |
100 +: | $ 21.64060 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 1.2kV |
Current - Average Rectified (Io): | 35A |
Voltage - Forward (Vf) (Max) @ If: | 1.35V @ 50A |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Mounting Type: | QC Terminal |
Package / Case: | B48 Module |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The B483F-2T diodes bridge rectifier is a four-terminal device, which has wide range of application. The device is primarily designed for providing full-wave rectification with its two input terminals connected to an alternating current line and its two output terminals connected to a load. The basic characteristic of the device is that it only allows electric current to flow through it in one direction - from one of the two input terminals to one of the two output terminals.
The B483F-2T is typically used in applications such as power supplies, DC to DC converters, switched mode power supplies, and many other high-voltage applications. It is specifically designed to provide full-wave rectified power output with efficiency, low noise, and low heat dissipation. It is also used to provide isolation between two different circuits or devices.
The basic operating principle of the B483F-2T diode bridge rectifier is simple. When alternating current from an AC source is applied to the two input terminals, the device allows current to flow from one input terminal to the other output terminal. When current flows from one input terminal to the output terminal, the other input terminal is shut off from the current, thus allowing only half of the AC wave to be rectified. As the AC wave goes back and forth, only half of it is allowed to pass through the device, providing full-wave rectification.
The B483F-2T diode bridge rectifier is also designed to provide isolation between two circuits. It is equipped with a built-in isolator that prevents current from flowing from one circuit to the other. This ensures the two circuits are electrically isolated from each other and protects them from any possible electrical damage.
In conclusion, the B483F-2T diode bridge rectifier is an ideal device for applications where full-wave rectification and isolation are required. Its high efficiency, low noise and low heat dissipation make it a suitable choice for a variety of power supplies and DC to DC converters.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
B483C-2T | Sensata-Cryd... | 23.81 $ | 13 | MOD DIODE PWR 35A 240VAC ... |
B483C-2 | Sensata-Cryd... | 23.81 $ | 7 | MOD DIODE PWR 35A 240VAC ... |
B483F-2T | Sensata-Cryd... | 27.24 $ | 10 | MOD DIODE PWR 35A 480VAC ... |
B483F-2 | Sensata-Cryd... | 27.24 $ | 8 | MOD DIODE PWR 35A 480VAC ... |
B483H-2T | Sensata-Cryd... | 31.34 $ | 1000 | MOD DIODE PWR 35A 600VAC ... |
B483B-2 | Sensata-Cryd... | 0.0 $ | 1000 | MOD DIODE PWR 35A 120VAC ... |
B483B-2T | Sensata-Cryd... | 0.0 $ | 1000 | MOD DIODE PWR 35A 120VAC ... |
B483G-2T | Sensata-Cryd... | 0.0 $ | 1000 | MOD DIODE PWR 35A 530VAC ... |
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...