B59960C0080A070

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

PTC Resettable Fuses (RFF) are a type of resettable electrical protection device. The B59960C0080A070 is a type of PTC Resettable Fuse with enhanced characteristics, capable of protecting circuits from overvoltage and short circuit conditions. It is designed for use in automotive and industrial applications.

Application Field

The B59960C0080A070 is suitable for a variety of applications in both the automotive and industrial sectors. It is capable of being used as a protection for batteries, lighting systems, and power converters, allowing for a wide range of applications in these areas. In the automotive sector, the B59960C0080A070 can be used to protect against the risk of short-circuit and overvoltage conditions in start-stop systems. In the industrial sector, the PTC Resettable Fuse can be used in motor controllers, remote sensing devices, and connected devices such as printers.

Working Principle

The B59960C0080A070 is an overcurrent-sensitive device. It is designed not to allow a current to exceed a predetermined limit. In normal operation, the PTC Resettable Fuse works as a regular barrier, allowing current to pass through it. When the current exceeds the preset limit, the PTC Resettable Fuse\'s internal resistance increases drastically, blocking the excess current. This results in the device protecting the circuit from any further damage.

To reset the B59960C0080A070, the connected circuit must be disconnected from the power supply. Once the current drops below the preset limit, the PTC Resettable Fuse will return to its original state, and the circuit can be powered up once again. This resetting procedure is done manually, and there is no need for an external mechanism.

Conclusion

The B59960C0080A070 is a type of PTC Resettable Fuse. It is designed to protect circuits from overvoltage and short circuit conditions. The B59960C0080A070 is suitable for both automotive and industrial applications. Its working principle is based on its internal resistance increasing when the pre-set current limit has been exceeded, thus effectively blocking the current.

The specific data is subject to PDF, and the above content is for reference