B88069X8650B502

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are a kind of surge protection device that is used to protect electronic equipment in power systems. It is made up of a spark gap and a gas tube. When voltages higher than the breakdown voltage of the gas tube are applied, the gap in the gas tube breaks down and allows current to flow, thereby providing protection from a surge or spike in voltage. The B88069X8650B502 is an example of a GDT that is designed for use in power systems.

In general, GDTs are used to protect power circuits from overvoltages that can occur from lightning strikes, switching surges, and other sources. In order to do this, the tube must be able to withstand voltages higher than the maximum rated voltage of the system. When these voltages are exceeded, the electrical arcs that are generated in the gap of the gas tube cause a current to flow, resulting in a rapid reduction in the voltage. This reduces the amount of stress placed on the components of the circuit and prevents them from being damaged by an overvoltage.

The B88069X8650B502 is a type of GDT designed for use in 220VAC power systems. It has a maximum voltage rating of 1000V, which is much higher than the typical 220VAC system. This means that the GDT can be used to protect 220VAC circuits from much higher voltages, such as those that might be encountered during a lightning strike. The B88069X8650B502 is also designed to have a very fast response time, so that it can protect the circuit from voltages that may occur in fractions of a second.

In addition to its voltage rating, the B88069X8650B502 also has a current rating, which is the maximum amount of current that it can safely handle before breaking down. This is important for ensuring that the GDT can actually protect the circuit from a voltage surge. The current rating of the B88069X8650B502 is 25A, which is more than enough for most 220VAC circuits.

The working principle of the B88069X8650B502 is simple. The gas tube is made up of two electrodes, with a gap between them. When a voltage higher than the breakdown voltage of the gas tube is applied, an arc forms across the gap, allowing current to flow and dissipate the excess voltage. This reduces the amount of stress placed on the components of the circuit and prevents them from being damaged by an overvoltage.

The B88069X8650B502 can be used in a variety of applications, such as telecom switching systems, electrical motors, inverters, wind turbines, transformers, and other high voltage systems. It is designed for use in high voltage systems, but can be used in low voltage systems as well. It is an excellent solution for protecting circuits from lightning strikes, switching surges, and other overvoltage events.

In conclusion, the B88069X8650B502 is a type of Gas Discharge Tube Arresters (GDT) designed for use in high voltage power systems. It has a maximum voltage rating of 1000V and a current rating of 25A, which are enough for most 220VAC systems. The GDT works by allowing current to flow across a spark gap when voltages higher than the breakdown voltage of the gas tube are applied, which reduces the amount of stress placed on the components of the circuit and prevents them from being damaged by an overvoltage. The B88069X8650B502 can be used in a variety of applications, such as telecom switching systems, electrical motors, inverters, and other high voltage systems.

The specific data is subject to PDF, and the above content is for reference