BA9734AKV

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BA9734AKV is a voltage regulator device used in a variety of applications. It is primarily used as a DC-DC switch regulator to provide a steady output voltage even if the input voltage is fluctuating. This device is a specialized analog integrated circuit (IC) device of the general-purpose power switching regulator family and is a PMIC (Power Management IC). This particular device is used for a wide range of applications including laptop PCs, tablets, mobile phones or digital cameras.

The BA9734AKV is designed to step down the input voltage in order to achieve the desired output. It is a non-synchronous buck regulator which is capable of operating with a wide variety of inputs from 1.2V to 5V. In its most basic application, the output voltage is determined by an external reference voltage connected to an external resistor network. This voltage (R1/R2) determines the output voltage divider ratio of the device. The reference voltage is the voltage that the device tries to regulate to and is proportional to the output voltage of the device.

The device consists of a few main units, the power switch pin, the reference voltage control section, the error amplifier, and the gate control circuit. To utilize the device, the power switch pin must be connected to the power rail, the reference voltage control section is used to adjust the output voltage, the error amplifier is used to compare the error voltage between the divider resistor network and the reference voltage. The gate control section helps activate the power switch.

The loading of the device can be adjusted by a variable gain amplifier within the BA9734AKV. The amplifier voltage gain can be adjusted from 0 to infinity. The external reference voltage is set by an external potentiometer, which provides adjustment range from 0.2 V to 2.5 V. The device can provide a maximum output current of 2 A, and the package has a low thermal resistance of 2.5°C/W.

As a DC-DC switching regulator, BA9734AKV uses all of the above components to allow for a steady output voltage in the event of a fluctuating input voltage. The load is connected between the power switch pin and the output. The reference voltage is connected to the reference voltage control section and the error amplifier is used to compare the two voltages. The gate control circuit is used to turn the power switch on and off.

The power switch is controlled by the gate control circuit, and it is turned on by the gate voltage. If a voltage greater than the rated voltage is connected to the load, the error voltage increases and this is detected by the error amplifier. The amplifier output is sent to the gate control circuit and the power switch is turned off to maintain the output voltage.

The BA9734AKV is a highly versatile device, ideal for applications where a steady output voltage is required despite a fluctuating input voltage. The device has a wide operating range, adjustable voltage gain, and is packaged with a low thermal resistance. Furthermore, it can provide a maximum output current of 2 A, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference