BCM48BF060M240A00

Current - Output (Max):	47A
Size / Dimension:	1.28" L x 0.87" W x 0.26" H (32.5mm x 22.0mm x 6.7mm)
Package / Case:	Module
Mounting Type:	Surface Mount
Efficiency:	94.7%
Operating Temperature:	-55°C ~ 125°C
Features:	OCP, OTP, OVP, SCP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	2.25kV
Power (Watts):	240W
Series:	VI Chip® BCM®
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	6V
Voltage - Input (Max):	55V
Voltage - Input (Min):	38V
Number of Outputs:	1
Type:	Bus Converter Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters, sometimes referred to as switched-mode power supplies (SMPS), provide a way to convert direct current (DC) from one voltage level to another. DC DC converters are used in a variety of applications, from laptops, cell phone chargers, medical equipment, and even into the power grid. One type of DC DC converter is the BCM48BF060M240A00. In this article, we will discuss the application field and working principle of this device.The BCM48BF060M240A00 is a DC DC surface-mount power supply that provides a regulated DC output voltage, typically from 5V to 48V, with an input range of 12-28V. It is an isolated converter, meaning that there is a high degree of electrical separation between the input and output. Due to its small size and low cost, the BCM48BF060M240A00 is widely used in a variety of applications, including automotive electronics, industrial control, and medical systems. The design of the BCM48BF060M240A00 follows a basic switched-mode power supply topology, which consists of two main stages: the power stage, which converts the input voltage to the desired output voltage, and the control stage, which regulates the output voltage. The power stage consists of an insulated-gate bipolar transistor (IGBT) which is used to switch the isolated DC power supply on and off. The IGBT is driven by an external switching circuit which determines the operating frequency and duty cycle of the device. When the IGBT is on, current flows from the input source to the output load. When it is off, the current stops flowing, and the output voltage can be regulated by adjusting the duty cycle. The control stage consists of an isolated-type feedback circuit, which uses an opto-isolator to sense the output voltage and then feed back the signal to the switching circuit, thus maintaining the desired output voltage. In addition to the feedback circuit, there are other components in the control circuit such as protection circuits, monitoring circuits, and digital interfaces.Overall, the BCM48BF060M240A00 is a low-cost, high-efficiency DC DC converter that can provide an adjustable regulated DC output from a wide range of input sources. Thanks to its small size and wide input range, it is suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description