BCR166E6327HTSA1

DC Current Gain (hFE) (Min) @ Ic, Vce:	70 @ 5mA, 5V
Base Part Number:	BCR166
Supplier Device Package:	SOT-23-3
Package / Case:	TO-236-3, SC-59, SOT-23-3
Mounting Type:	Surface Mount
Power - Max:	200mW
Frequency - Transition:	160MHz
Current - Collector Cutoff (Max):	100nA (ICBO)
Vce Saturation (Max) @ Ib, Ic:	300mV @ 500µA, 10mA
Series:	--
Resistor - Emitter Base (R2):	47 kOhms
Resistor - Base (R1):	4.7 kOhms
Voltage - Collector Emitter Breakdown (Max):	50V
Current - Collector (Ic) (Max):	100mA
Transistor Type:	PNP - Pre-Biased
Part Status:	Last Time Buy
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BCR166E6327HTSA1 is a pre-biased single transistor commonly used in electronic applications. It is a bipolar junction transistor (BJT) and it is a type of semiconductor device that has three terminals and is used to amplify or switch electronic signals and electrical power.The key features of the BCR166E6327HTSA1 include its low offset voltage, low quiescent current, low thermal resistance, low power dissipation and high input impedance. Additionally, it has a wide supply voltage range of 2.7 to 5.5V and a collector-emitter saturation voltage (VCE(sat)) of 0.8V, making it suitable for use in battery powered applications. Its high DC current gain (hFE) of 1,000 and high DC output current (Ic) of 550mA make it capable of driving a wide range of devices.The BCR166E6327HTSA1 is most commonly used in a variety of applications including amplifiers, voltage regulators, power switching and motor control. In amplifiers, the transistor is used to increase the electrical current from the signal source. This allows for greater signal strength and amplitude. In voltage regulators, the transistor is used to control the voltage output by regulating the amount of current entering the device and maintaining a constant output. In power switching applications, it is used to switch circuits on and off and can serve as either a charger or a battery switch. Finally, in motor control applications, the transistor is used to switching substantial currents and can be used to control and deliver precise amounts of power to motors.The working principle of the BCR166E6327HTSA1 is based on the fact that current flow is controlled by voltage. The transistor acts as an electronically-controlled switch, which can be turned on or off depending on the voltage levels of its three terminals: the base, the collector and the emitter. The base-emitter junction of the transistor is forward-biased when the base voltage is greater than the emitter voltage, and so current flow can begin when the base voltage is increased and forward bias is created. The base-collector junction is reverse-biased when the base voltage is lower than the collector voltage and so current flow stops and the transistor is, therefore, turned off.The BCR166E6327HTSA1 is, therefore, a pre-biased single transistor that is used in a variety of applications and works on the principle of controlling current flow through voltage control. With its wide supply voltage range and its high DC output current, it is an ideal choice for a range of applications that require reliable and consistent performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description