BD6069GUT-E2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - LED Drivers are semiconductor devices that allow applications to control and dim LEDs. This type of device has many benefits and is found in a range of applications spanning from consumer electronics to automotive lighting. The BD6069GUT-E2 is one such device and its use within these applications requires a good understanding of its operating principles and performance capabilities. This article will discuss the NCP3063\'s application fields and working principles.

The BD6069GUT-E2 LED Driver is an integrated LED driver with high efficiency and a wide dimming range, designed for direct driving of low power LEDs. It is optimized for applications such as small LCD displays, touch screens, automotive interior lighting and other related lighting applications requiring varying levels of brightness. It also offers protection from thermal overload and failure.

The BD6069GUT-E2 is capable of driving up to 150mA of current per channel, and can operate at 5V or 6V. The device features manual brightness control, which lets users adjust the brightness of the LEDs by adjusting its built-in variable resistor.

In terms of performance capabilities, the BD6069GUT-E2 LED Driver has a wide dimming range, thanks to its 200:1 dimming ratio. This wide range makes it suitable for a range of applications, from soft and subtle lighting to bright illumination. Furthermore, the device can achieve a PWM frequency of up to 10KHz, which is higher than most other LED drivers.

The BD6069GUT-E2 is also capable of providing over-voltage and over-current protection, thermal protection and short circuit protection. These features allow it to be used in a variety of different LED driver applications, including automotive interior lighting, panel lighting, and general-purpose operations.

In terms of application areas, the BD6069GUT-E2 LED Driver can be used in a wide range of applications. Automotive interior lighting is one of its primary application areas, due to its ability to provide adjustable brightness levels and protection from thermal and electrical failure. It is also suitable for LCD panel displays and home appliance touch screens. Additionally, it can be used for general-purpose operations where adjustable and/or programmable illumination is desired.

Finally, the working principle behind the BD6069GUT-E2 LED Driver is relatively straightforward. The device consists of two P-Channel MOSFETs, two current-sensing resistors and two internal voltage regulators. The two MOSFETs are connected in a parallel arrangement and act as the switches for driving LEDs. When the input voltage is increased, the MOSFETs open and close, resulting in an increased or decreased current, respectively. This resulting current is then regulated by the two voltage regulators, thus allowing users to adjust the brightness of the LEDs.

In conclusion, the BD6069GUT-E2 is an excellent LED Driver that can be used in a range of applications. It features a wide dimming range, over-voltage and over-current protection, thermal protection and short circuit protection. Furthermore, its working principle is relatively simple and involves two MOSFETs and two voltage regulators for adjusting the brightness of LEDs. As such, it is an ideal choice for applications such as automotive interior lighting, panel lighting, and general-purpose operations.

The specific data is subject to PDF, and the above content is for reference