Allicdata Part #: | 374-1321-ND |
Manufacturer Part#: |
BE05-1A66-P |
Price: | $ 7.76 |
Product Category: | Relays |
Manufacturer: | Standex-Meder Electronics |
Short Description: | RELAY REED SPST 0.5A 5V |
More Detail: | N/A |
DataSheet: | BE05-1A66-P Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 7.05348 |
Turn Off Voltage (Min): | 0.75 VDC |
Coil Resistance: | 140 Ohms |
Coil Power: | 179 mW |
Contact Material: | -- |
Operating Temperature: | -20°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | Sealed - Fully |
Release Time: | 0.1ms |
Operate Time: | 0.5ms |
Series: | BE |
Turn On Voltage (Max): | 3.5 VDC |
Switching Voltage: | 200VAC, 200VDC - Max |
Contact Rating (Current): | 500mA |
Contact Form: | SPST-NO (1 Form A) |
Coil Voltage: | 5VDC |
Coil Current: | 35.8mA |
Coil Type: | Non Latching |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Reed Relays
Reed relays are electromagnetic relays which were invented in the early 1920s by W.A. Mosely, an American physicist. They are typically used in low-power, high frequency, or low-level switching applications, and offer several advantages over other types of relays. Reed relays can be used to switch low-level signals with low power—they are typically much smaller than other types of relays. This is possible because, unlike other relays, reed relays do not require an actuator. Instead, a current flows through an electromagnet, causing the contacts to move. They can also be used to switch signals with very short transition times.
The BE05-1A66-P is a popular reed relay model developed by Omron Corporation. It is a double-throw latching relay featuring an open collector, which makes it ideal for applications that require a low-power, high-precision switch. This relay operates at an idle voltage of 6V and a maximum voltage of 24V. It has a rated current of 100 mA, and the contacts remain closed until the voltage is removed.
The working principle of the BE05-1A66-P reed relay is fairly simple. When a voltage is supplied to the relay, an electromagnet is energized, causing the contacts to close. When the voltage is removed, the contacts remain closed until another electrical impulse is applied, causing the contacts to open again. This process is what makes reed relays so useful—they can switch with very short response times, offer electrical isolation, and require very little power.
The BE05-1A66-P reed relay has a wide range of applications, including low-level applications in communication networks, automotive, industrial, and consumer electronics. In communication networks, reed relays are used to detect and switch signals with very low power, allowing for accurate and reliable switching of low-level signals. Additionally, they are very useful in industrial applications where switch precision is critical, as they can switch signals with very little power. Finally, they are also commonly used in consumer electronics for their low power draw and high switching precision.
The BE05-1A66-P reed relay is a highly reliable and accurate switch which is used in a variety of applications thanks to its low power requirement, high switching speed, and electrical isolation. With its many advantages, it is an essential component of any low-power or low-level switching system.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BE05-2A85-P | Standex-Mede... | 12.93 $ | 749 | RELAY REED DPST 1A 5V |
BE05-2A88-P | Standex-Mede... | 0.0 $ | 1000 | RELAY REED DPST 1A 5V |
BE05-1A66-P | Standex-Mede... | 7.76 $ | 1000 | RELAY REED SPST 0.5A 5V |
BE05-1A85-P | Standex-Mede... | 9.06 $ | 1000 | RELAY REED SPST 1A 5V |
RELAY REED SPST 1A 5V
RELAY REED SPST 500MA 24V
RELAY REED DPST 500MA 24V
RELAY REED 3PST 250MA 5V
RELAY REED SPST 500MA 24V
RELAY REED SPST 1A 24V UL