Allicdata Part #: | BE12-2A66-P-ND |
Manufacturer Part#: |
BE12-2A66-P |
Price: | $ 9.44 |
Product Category: | Relays |
Manufacturer: | Standex-Meder Electronics |
Short Description: | RELAY REED DPST 0.5A 12V |
More Detail: | N/A |
DataSheet: | BE12-2A66-P Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 8.58438 |
Turn Off Voltage (Min): | 1.8 VDC |
Coil Resistance: | 445 Ohms |
Coil Power: | 324 mW |
Contact Material: | -- |
Operating Temperature: | -20°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | Sealed - Fully |
Release Time: | 0.1ms |
Operate Time: | 0.5ms |
Series: | BE |
Turn On Voltage (Max): | 8.4 VDC |
Switching Voltage: | 200VAC, 200VDC - Max |
Contact Rating (Current): | 500mA |
Contact Form: | DPST-NO (2 Form A) |
Coil Voltage: | 12VDC |
Coil Current: | 27.0mA |
Coil Type: | Non Latching |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Reed relays are electronic components which utilize an electrical current to close a contact within an electro-magnet. In comparison to traditionally mechanical relays, reed relays are smaller, lighter and faster, making them more suitable for use in small, compact electronic applications.
The BE12-2A66-P is a high-performance, reed relay capable of switching up to 10A and up to 48VDC. This device features a dual reed switch and a terminal block. The dual reed switch consists of two individual reeds connected to a common terminal block. This enables the reed relay to switch multiple loads or signals simultaneously without the need for additional wire or switching devices.
The BE12-2A66-P is designed for use in a wide range of applications. The dual reed switch allows it to be used in circuits that require multiple inputs or outputs, such as pulse-width-modulator (PWM) circuits for controlling motors or as part of a timing circuit. Other applications include switch mode power supplies, servo motors and other equipment where multiple switching signals are required.
The working principle of the BE12-2A66-P is quite simple. When an electrical signal is applied to it, the dual reed switch within the relay closes, causing the output terminal block to connect to the corresponding input terminal. This then switches the desired load or signal. When the signal is removed, the reed switch will open, breaking the connection and disconnecting the output terminal.
The BE12-2A66-P is an ideal solution for applications where multiple output switching is required. Its robust design and high reliability makes it well suited to applications such as switch mode power supplies, motor control and timing circuits. With its compact size, low cost and excellent performance, the BE12-2A66-P is an ideal choice for reed relay applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BE123461 | Bulgin | 3.34 $ | 302 | CABLE GLAND BLACKCable Gl... |
BE123460 | Bulgin | 3.34 $ | 109 | CABLE GLAND GREYCable Gla... |
BE123456 | Bulgin | 1.56 $ | 310 | DIN RAIL CLIP GREY |
BE123457 | Bulgin | 1.56 $ | 290 | DIN RAIL CLIP BLACK |
BE123459 | Bulgin | 2.36 $ | 103 | WALL MOUNTING FLANGE BLAC... |
BE123458 | Bulgin | 1.99 $ | 1000 | WALL MOUNTING FLANGE GREY |
BE12-1A85-P | Standex-Mede... | 6.22 $ | 1000 | RELAY REED SPST 1A 12V |
BE12-2A85-P | Standex-Mede... | 7.12 $ | 960 | RELAY REED DPST 1A 12V |
BE12-2A66-P | Standex-Mede... | 9.44 $ | 1000 | RELAY REED DPST 0.5A 12V |
RELAY REED SPST 1A 5V
RELAY REED SPST 500MA 24V
RELAY REED DPST 500MA 24V
RELAY REED 3PST 250MA 5V
RELAY REED SPST 500MA 24V
RELAY REED SPST 1A 24V UL