Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film Capacitors

Film capacitors are widely used in electrical, electronic and mechanical applications including power supplies, home appliances, radio and TV, signal processing, audio and medical electronics and computer networking. Film capacitors are generally constructed using a thin plasticized film, either polyethylene terephthalate (PET) or polystyrene (PS). In order to achieve the desired electrical characteristics, the film is coated with metal electrodes with either a continuous or segmented pattern depending on the application. The two most common types of film capacitors are metallized and non-metallized capacitors.

BFC238304824 Application Field and Working Principle

The BFC238304824 is a metallized polycarbonate film capacitor made up of a thin metalized polycarbonate film with a sawtooth electrode pattern. This type of capacitor is designed specifically for use in high frequency power supplies of up to 10 kHz, as well as for degaussing circuits in televisions. The capacitor is rated to withstand up to 630 volts of DC, or 575 volts AC. It is designed to provide a capacitance range from 0.01 uF to 0.1 uF, with a temperature range of -40°C to +105°C.

The working principle of the BFC238304824 capacitor is relatively simple. When the applied voltage is greater than the dielectric strength of the capacitor, electrons flow through the thin polycarbonate film, which can then be stored as an electrical charge. This electrical charge builds up until it reaches the maximum rating of the capacitor (usually a voltage or a current), and then the charge discharges across the load as current.

The capacitor also has an in-built self-healing feature, which works to reduce the risk of catastrophic failure due to overvoltage conditions. This self-regulating property allows the capacitor to continuously recover from breakdown, and thus to retain its rated capacitance even in the unlikely event of an overvoltage situation. When the voltage across the capacitor is greater than its rated peak voltage, the dielectric of the capacitor will break down and discharge a electric current. This current then causes a localised temperature rise, which in turn melts the metal coating, thus redistributing the electric field, and thus allowing the capacitor to recover.

As with most capacitors, the BFC238304824 has a limited life span and should be replaced when its capacitance or voltage ratings have been exceeded. It should also be avoided in applications that require high inductance values such as in motor start-up circuits. Additionally, the capacitor should not be used in locations exposed to high vibration or shock, as this can cause the capacitor to fail. As with all capacitors, proper installation and regular maintenance is necessary to ensure that the device operates properly.

The specific data is subject to PDF, and the above content is for reference