BFC241905602

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as plastic film capacitors, are capacitors mainly made of polypropylene, polyester, metal polyphenylene sulfide, and other film materials. The BFC241905602 is a film capacitor, and it is commonly used for AC line filters, X-ray generators, radar modulators, and switching power supplies. This capacitor has a high insulation resistance, and is able to withstand high voltage, high frequency, and high temperature. In addition, the BFC241905602 has a low current leakage, low dielectric losses, and good self-healing properties.

The working principle of the BFC241905602 is a simple one. It consists of two metal plates which are attached to a dielectric film. When a voltage is applied between the two plates, it causes charges to accumulate on the metal plates. This creates an electric field across the dielectric film which stores the energy. The amount of energy stored is proportional to the voltage applied and the amount of capacitance of the capacitor. In other words, the more voltage applied, the more energy is stored.

When the applied voltage is higher than the rated voltage, the energy stored in the capacitor can be released. This is done by connecting the capacitor to a load and allowing electrons to flow from the capacitor to the load. As a result, the capacitor can transfer energy to the load. The energy released depends on the amount of capacitance of the capacitor and the amount of voltage applied.

The BFC241905602 is a high voltage, high frequency, and high temperature film capacitor. It is mainly used for AC line filters, X-ray generators, radar modulators, and switching power supplies. The capacitor is able to withstand high voltage, high frequency, and high temperature, and has a low current leakage, low dielectric losses, and good self-healing properties. In addition, it has a simple working principle which consists of two metal plates and a dielectric film which stores energy when a voltage is applied. The capacitor can then be connected to a load, allowing electrons to flow from the capacitor to the load and transferring energy to the load.

The specific data is subject to PDF, and the above content is for reference