Allicdata Part #: | 568-5629-ND |
Manufacturer Part#: |
BGY883,112 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NXP USA Inc |
Short Description: | IC AMP PUSH-PULL SOT115J |
More Detail: | Video Amp, 1 CATV SOT115J |
DataSheet: | BGY883,112 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Applications: | CATV |
Output Type: | Push-Pull |
Number of Circuits: | 1 |
Slew Rate: | -- |
Current - Supply: | 235mA |
Voltage - Supply, Single/Dual (±): | -- |
Mounting Type: | -- |
Package / Case: | SOT-115J |
Supplier Device Package: | SOT115J |
Base Part Number: | BGY883 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The BGY883, 112 is a linear amplifier module used in video applications. It is designed to provide a high-performance, wide bandwidth amplifier solution in a surface mount IC form factor. It features a power management system, amplifier temperature feedback, current limiting, and protection against over/under voltage and over/under current. It is suitable for amplifying audio or video signals in a wide range of applications.
The BGY 883, 112 is a low power amplifier module designed to be used in point-of-use amplifier applications such as computer display monitors. It is designed to provide a low power solution suitable for a wide range of video signals including composite video, S-Video and component video. It also provides a high level of bandwidth and dynamic range to ensure a crisp, clear picture. It is power-managed, with low idle current draw when not in use, yet provides high performance when required.
The BGY 883, 112 is a video amplifier module that accepts a variety of video sources, including composite video and S-Video. It is designed to drive a load impedance of up to 75 ohms. It utilizes a precision current limiter circuit to ensure safe and reliable operation by limiting the output current in the event of a short circuit condition. It also features a built-in thermal protection circuit to protect the amplifier from thermal failure. The output stage is also protected against input voltages up to 500 volts.
The BGY 883, 112 operates in an amplifier configuration that is optimized for video applications. It has a wide gain bandwidth of up to 45 MHz and a stable gain of +10 dB at 10 MHz. It also has a dynamic range of up to 80 dB and a low distortion of 0.2% at 1 kHz. It provides maximum output power of up to 50 watts with supply voltages ranging from 9 to 26 volts, and it can operate over a wide temperature range of -40 to +85 degrees Celsius.
In video applications, the BGY 883, 112 is typically used to drive LCD, LED, or plasma displays. It can amplify video signals including composite, S-Video, and component video, with an input range of 0.5 to 4 volts peak-to-peak. The amplifier provides a low noise figure, low distortion, and a high power output. It utilizes a varying gain automatic level control (AGC) circuit to ensure consistent video image brightness and allows use of wide input ranges while maintaining flat frequency response.
The BGY 883, 112 also features an optional temperature feedback circuit to reduce power consumption during periods of low output current, which improves overall power efficiency. This helps reduce the need for additional cooling, as well as reduce power consumption, making it an ideal solution for applications where power efficiency and extended battery life are desired.
The BGY 883, 112 is an ideal solution for applications such as notebook computer display panels, industrial or military monitors, or large format displays. It is a reliable, cost-effective solution for video amplification that is suited for a wide range of video signals including composite video, S-Video and component video. The high performance BGY 883, 112 provides excellent video image quality and performance and is ideally suited for a wide range of video applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BGY887,112 | NXP USA Inc | 24.62 $ | 6 | IC AMP PUSH-PULL SOT115JV... |
BGY888,112 | NXP USA Inc | 0.0 $ | 1000 | IC PUSH-PULL AMP 860MHZ S... |
BGY883,112 | NXP USA Inc | 0.0 $ | 1000 | IC AMP PUSH-PULL SOT115JV... |
BGY885A,112 | NXP USA Inc | 0.0 $ | 1000 | IC AMP PUSH-PULL SOT115JV... |
BGY835C,112 | NXP USA Inc | 0.0 $ | 1000 | IC AMP CATV MODULE SOT115... |
BGY887B,112 | NXP USA Inc | 0.0 $ | 1000 | IC AMP CATV MODULE SOT115... |
BGY885B,112 | NXP USA Inc | 0.0 $ | 1000 | IC AMP PUSH-PULL SOT115JV... |
IC CATV AMP MOD 1000MHZ 7-CATVVideo Amp,...
IC AMP FILTER W/SHUTDOWN 10-UMAXVideo Am...
IC GAMM CORRECT BUFF 16-HTSSOPVideo Amp,...
IC AMP MULTIPLEX 900MHZ 16-QSOPVideo Amp...
IC MUX/VIDEOAMP 8CH 50MHZ 20SOICVideo Am...
IC AMP PUSH-PULL 870MHZ SOT115JVideo Amp...