BNX012-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are used in electrical circuits to reduce noise and provide power supply conditioning. The BNX012-01 filter is a designed especially to reduce the noise in high frequency circuits, including consumer electronics, telecommunications, automotive, and instrumentation. It is specifically designed to provide EMI/RFI protection while maintaining signal integrity in high frequency applications. The filter works by reducing the amount of electromagnetic radiation (EMI) and radio frequency interference (RFI) that pass through a circuit.

The BNX012-01 filter is a two-stage LC (inductor-capacitor) filter. It consists of an inductor and two capacitors in a shunt configuration. The filter is designed to attenuate high frequency signals, while allowing lower frequency signals to pass through. The inductor can take the form of surface mount inductors, or wound inductors. The two capacitors are typically other surface mount capacitors, such as ceramic capacitors or tantalum capacitors.

The filter works by using the inductor to attenuate the higher frequency signals, while the capacitors act as a short circuit, blocking the high frequency signals and allowing only the signals below the cut-off frequency to pass through. The cutoff frequency of the filter can be adjusted by changing the ratios of the inductance and capacitance. The BNX012-01 filter is designed to have a cut-off frequency of 150 MHz, which is ideal for high frequency applications.

The BNX012-01 filter is used in a variety of applications, such as consumer electronics, telecommunications, automotive, and instrumentation. In consumer electronics, the filter is used to reduce the EMI/RFI generated by electronic circuits. In telecommunications, it is used to reduce the amount of interference between different systems. In automotive applications, the filter is used to reduce engine noise and provide power conditioning. In instrumentation, the filter is used to reduce the background noise from instruments.

The BNX012-01 filter is a simple and effective way to reduce noise in high frequency circuits. It uses a simple LC (inductor-capacitor) filter to reduce the amount of EMI/RFI entering the system, while providing power conditioning. The filter can be easily adjusted to change the cut-off frequency, allowing for the optimization of the signal for different applications. In addition, the filter is small and lightweight, making it easy to incorporate into a wide range of applications.

The specific data is subject to PDF, and the above content is for reference