BP0EA3180A7TR Filters

Series:	BP
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Frequency:	3.18GHz
Bandwidth:	1.69GHz
Filter Type:	Band Pass
Ripple:	--
Insertion Loss:	0.97dB
Mounting Type:	Surface Mount
Size / Dimension:	0.460" L x 0.170" W (11.68mm x 4.32mm)
Height (Max):	0.022" (0.56mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF FiltersThe BP0EA3180A7TR is a type of RF Filter, specifically a Band-Pass Filter. A Band-Pass Filter is an electrical device designed to allow only a particular range of frequencies to pass through while blocking all other frequencies and signals. The BP0EA3180A7TR is a low pass filter, meaning it blocks higher frequencies while allowing lower frequencies to pass. It is typically used in radio communications and satellite systems to separate out interfering signals.The BP0EA3180A7TR is designed for use in both commercial and military applications. It is designed to filter out frequencies between 3.0 MHz and 3.6 MHz, and it can be used as both a transmit and receive filter. It is also designed to operate in the temperature range from -40°C to 105°C, making it suitable for use in extreme environments.The BP0EA3180A7TR is a band-pass filter, meaning it passes a narrow range of frequencies and blocks all other frequencies. It is designed with a high Q factor, which is a measure of the sharpness of the filter. The high Q factor ensures that only frequencies within the specified range will be allowed to pass.The BP0EA3180A7TR is constructed with two capacitors and two inductors. The two capacitors are located at either side of the filter, while the two inductors are in the middle of the filter. The capacitors serve to block frequencies lower than the specified range, while the inductors block frequencies higher than the specified range.The BP0EA3180A7TR operates on the principle of resonance. Resonance occurs when a filter is tuned to the exact frequency of a signal. When this happens, the filter acts as a selective barrier, allowing only the desired signal to pass through at that frequency. All other frequencies are blocked. The BP0EA3180A7TR is designed to operate at resonance, which ensures that only the specified frequencies are allowed to pass through the filter.The BP0EA3180A7TR is designed to be used in a variety of commercial and military applications. It can be used in radio communications, satellite systems, and any other system that requires the precise filtering of signals. The BP0EA3180A7TR ensures that only frequencies within the specified range will pass through the filter, eliminating interference from outside sources.In conclusion, the BP0EA3180A7TR is an RF Filter, specifically a Band-Pass Filter. It is designed to filter out frequencies between 3.0 MHz and 3.6 MHz while blocking all other frequencies. The BP0EA3180A7TR is constructed with two capacitors and two inductors, and it operates on the principle of resonance. The BP0EA3180A7TR is designed for use in a variety of commercial and military applications, and it ensures that only the specified frequencies pass through the filter.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description