BP0EA4600A700 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF filters are a primary form of signal conditioning used to separate a broad signal spectrum into smaller sections. Applications can vary from selecting certain signals from a wide band of frequency sizes, allowing only specific signals to pass through, or by pushing an unwanted signal on the desired band off to the side.

The BP0EA4600A700 RF filter provides this signal conditioning within a range of DC to 12.4 GHz. Its wide band allowance pairs with an internal Dual-Mode Band-Pass filter to separate and direct a variety of signals while suppressing those outside of the passband or specific frequency. The BP0EA4600A700 offers low insertion loss and excellent image rejection.

The primary operating principle behind the BP0EA4600A700 consists of a three-step process. The initial step requires the signal to pass through the input filter so as to limit the wide band of frequencies up to 12.4GHz. Next, the signal passes through a duplexer (or diplexer) which is used to separate desired frequencies from the undesired ones. Finally, the internal dual-mode filter is used to obtain a higher level of selectivity between the two desired frequencies. This combination provides the necessary image rejection.

This versatile filter can be used in a wide range of applications, including WiFi/Bluetooth/GPS, sample duplex, multi-user shared duplex, signal combining/splitting, wireless charging, and radio/repeater systems to name a few. The enlarged passband brings with it an array of options and opportunities for wireless applications. For instance, the BP0EA4600A700 can be used in wideband radio systems or in WCDMA applications. It can be used to improve signal quality and reduce unwanted interferences that come with a broad spectrum of frequencies.

The BP0EA4600A700 filter has also been adopted in Bluetooth Low Energy (BLE) standards such as Bluetooth 5, Bluetooth 4.2, and Bluetooth 4.1. With a maximum passband of 3MHz, the filter works to allow wireless networks to function both faster and more efficiently. This filter has the ability to reduce interference more effectively than ever before. Utilizing its Dual-Mode band pass filter, the BLE network will receive improved signal to noise ratio and reduce latency at a greater rate.

The BP0EA4600A700 filter is a powerful RF filter that provides signals conditioning for a wide range of applications. It provides excellent image rejection, low insertion loss, and the ability to separate desired frequencies from undesired ones. By utilizing a three-step process, the BP0EA4600A700 is a powerful and versatile filter and can be used in many wireless applications, including Bluetooth Low Energy (BLE).

The specific data is subject to PDF, and the above content is for reference